UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)

Notices

Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 12th Jan 2022, 9:28 pm   #1
telstar
Octode
 
Join Date: Dec 2003
Location: Leeds, West Yorkshire, UK.
Posts: 1,588
Default K.B MR10 drive cord rewind

Whilst trying to put a new drive cord on my K.B MR10 radio, I came unstuck with trying to get 3 turns around the tuning spindle. Then I discovered that there were 2 screws situated on the metal backing scale. Luckily I had a 4BA nut spinner tool that released these nut type screws and this made the job a whole lot easier to rethread the cord.
It sounds a bit obvious, but it is just a tip for anyone who is new to the hobby.
telstar is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 1:47 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.