UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Websites

Notices

Websites Found an interesting website? Post the details here and share it with the rest of us. Please stick to websites that are in some way related to our hobby/interest.

Closed Thread
 
Thread Tools
Old 24th Oct 2022, 9:47 pm   #1
Syrinx1
Pentode
 
Join Date: Feb 2018
Location: Nottingham, Nottinghamshire, UK.
Posts: 225
Default Homemade amplifier with homemade valves

Found this quite interesting....

https://youtu.be/-UEfqAWb3fE
Syrinx1 is offline  
Old 25th Oct 2022, 1:14 pm   #2
Syrinx1
Pentode
 
Join Date: Feb 2018
Location: Nottingham, Nottinghamshire, UK.
Posts: 225
Default Re: Homemade amplifier with homemade valves

Would it be possible to "repair" valves that had lost vacuum using this technique?
Syrinx1 is offline  
Old 25th Oct 2022, 1:54 pm   #3
Bazz4CQJ
Dekatron
 
Bazz4CQJ's Avatar
 
Join Date: Apr 2009
Location: Oxfordshire, UK.
Posts: 4,924
Default Re: Homemade amplifier with homemade valves

That's a long video and so I've just looked briefly at parts of it. Couldn't find a spot where she mentions what vacuum she's pulling or what kind of pump she has.

I think most basic rotary "Backing" pumps will get you down to 10E-2 Torr (is Torr out of date now?). If you need better, you probably need something more expensive. For glassblowing, I have one of these https://www.ebay.co.uk/itm/172114021...Bk9SR7CC9vKBYQ which will handle borosilicate glass well.

I think to try re-vac a valve you'd need an experienced glass blower. The problem will be that the getter has already been fired; that may well be a show stopper
Bottom line, I don't think it looks viable.

B
__________________
Saturn V had 6 million pounds of fuel. It would take thirty thousand strong men to lift it an inch.
Bazz4CQJ is offline  
Old 25th Oct 2022, 3:24 pm   #4
Buzby123
Heptode
 
Buzby123's Avatar
 
Join Date: Oct 2011
Location: Culcheth, Cheshire, UK.
Posts: 637
Default Re: Homemade amplifier with homemade valves

Well, I'm seriously impressed !.

The amount of hand-crafting that went into just a simple triode.

This must have been how the first valves were produced. But to produce multi-element valves, reliably, and in commercial quantities must have needed huge advances in manufacturing technology.

As to re-vaccing and gettering an old valve, the video gives a clue how it might be done, but it would be a lot of work, and the result would probably not fit where the original did.
Buzby123 is offline  
Old 25th Oct 2022, 11:43 pm   #5
GrimJosef
Dekatron
 
Join Date: Sep 2007
Location: Oxfordshire, UK.
Posts: 4,310
Default Re: Homemade amplifier with homemade valves

Quote:
Originally Posted by Bazz4CQJ View Post
... I think to try re-vac a valve you'd need an experienced glass blower. The problem will be that the getter has already been fired; that may well be a show stopper
Bottom line, I don't think it looks viable.
The lack of a getter would be one issue, although I suppose it might be possible to put more getter material in and re-fire it once the valve is under vacuum again.

More of a problem might be if the valve has an oxide-coated cathode. This is prepared initially by coating the cathode support with a slurry of inorganic metal compounds and then allowing the slurry to dry. The cathode support is then placed in position and the electrode structure assembled. Once the vacuum has been applied the cathode is heated to a very high temperature and the metal compounds undergo a chemical reaction which generates the highly electron-emissive cathode coating. This coating is easily 'poisoned' by even quite a small amount of air. So as well as needing a new getter you'd also need a new cathode and you'd have to go through the hot-chemistry-under-vacuum stage again to create it. It wouldn't be much more trouble to create a whole new valve.

Cheers,

GJ
__________________
http://www.ampregen.com
GrimJosef is online now  
Old 26th Oct 2022, 12:38 pm   #6
greg_simons
Octode
 
greg_simons's Avatar
 
Join Date: Jul 2004
Location: Evesham, Worcestershire, UK.
Posts: 1,415
Default Re: Homemade amplifier with homemade valves

Quote:
Originally Posted by GrimJosef View Post
Quote:
Originally Posted by Bazz4CQJ View Post
... I think to try re-vac a valve you'd need an experienced glass blower. The problem will be that the getter has already been fired; that may well be a show stopper
Bottom line, I don't think it looks viable.
The lack of a getter would be one issue, although I suppose it might be possible to put more getter material in and re-fire it once the valve is under vacuum again.

More of a problem might be if the valve has an oxide-coated cathode. This is prepared initially by coating the cathode support with a slurry of inorganic metal compounds and then allowing the slurry to dry. The cathode support is then placed in position and the electrode structure assembled. Once the vacuum has been applied the cathode is heated to a very high temperature and the metal compounds undergo a chemical reaction which generates the highly electron-emissive cathode coating. This coating is easily 'poisoned' by even quite a small amount of air. So as well as needing a new getter you'd also need a new cathode and you'd have to go through the hot-chemistry-under-vacuum stage again to create it. It wouldn't be much more trouble to create a whole new valve.

Cheers,

GJ
Looking at glasslinger's videos on tube production he uses getters from old valves that are no good, working on the principle that there's still some unfired material to use, you have to work pretty fast with them once they're exposed to air and become unusable.
Greg.
__________________
Picture, sound?, DOOR.
greg_simons is offline  
Old 26th Oct 2022, 1:41 pm   #7
JonSnell
Hexode
 
JonSnell's Avatar
 
Join Date: Oct 2019
Location: Weymouth, Dorset, UK.
Posts: 473
Default Re: Homemade amplifier with homemade valves

Quote:
Originally Posted by Syrinx1 View Post
Found this quite interesting....

https://youtu.be/-UEfqAWb3fE
You may find this guy interesting.
Shows the theory behind the making of the valve (tube).
https://www.youtube.com/watch?v=GAMRHcbE3g0&t=26s

One could repair a valve that was down to air if the heaters could be replaced and fresh oxide placed on the getter.
__________________
Valve equipment repairs since 1968 https://jonsnell.co.uk

Last edited by JonSnell; 26th Oct 2022 at 1:42 pm. Reason: More info added ...
JonSnell is online now  
Old 26th Oct 2022, 2:23 pm   #8
G6Tanuki
Dekatron
 
G6Tanuki's Avatar
 
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 13,953
Default Re: Homemade amplifier with homemade valves

I don't know just how much of a vacuum is needed in a practical valve, but the big silica envelope transmitter valves used in times past were sometimes continually pumped rather than being sealed and gettered.

A modern turbomolecular pump can go down to 1*10^^-8 Pascal, but it isn't cheap to buy or easy to operate.
__________________
I'm the Operator of my Pocket Calculator. -Kraftwerk.
G6Tanuki is offline  
Old 26th Oct 2022, 8:09 pm   #9
Syrinx1
Pentode
 
Join Date: Feb 2018
Location: Nottingham, Nottinghamshire, UK.
Posts: 225
Default Re: Homemade amplifier with homemade valves

Quote:
Originally Posted by JonSnell View Post
Quote:
Originally Posted by Syrinx1 View Post
Found this quite interesting....

https://youtu.be/-UEfqAWb3fE
You may find this guy interesting.
Shows the theory behind the making of the valve (tube).
https://www.youtube.com/watch?v=GAMRHcbE3g0&t=26s

One could repair a valve that was down to air if the heaters could be replaced and fresh oxide placed on the getter.
Fascinating stuff... I'd love to take a closer look at that lathe!
Syrinx1 is offline  
Old 26th Oct 2022, 8:17 pm   #10
Bazz4CQJ
Dekatron
 
Bazz4CQJ's Avatar
 
Join Date: Apr 2009
Location: Oxfordshire, UK.
Posts: 4,924
Default Re: Homemade amplifier with homemade valves

No doubt, the guy at Brimar will know all about this... but may be coy about disclosing details.

B
__________________
Saturn V had 6 million pounds of fuel. It would take thirty thousand strong men to lift it an inch.
Bazz4CQJ is offline  
Old 27th Oct 2022, 8:55 pm   #11
Vintage_RC
Heptode
 
Vintage_RC's Avatar
 
Join Date: Sep 2018
Location: Twickenham, London, UK.
Posts: 536
Default Re: Homemade amplifier with homemade valves

Very interesting video, thanks for posting the link. There are skills and equipment there that I certainly don't have.
__________________
Alan G6PUB, BVWS
Vintage_RC is offline  
Old 31st Oct 2022, 7:02 pm   #12
Dekatron
Octode
 
Dekatron's Avatar
 
Join Date: May 2009
Location: Linkoping, Sweden
Posts: 1,463
Default Re: Homemade amplifier with homemade valves

It’s not a valve but a Nixie but it might anyeay interest you since they are in production with getters: https://www.daliborfarny.com/
__________________
Martin, Sweden
Dekatron is offline  
Old 2nd Nov 2022, 9:44 am   #13
RichardGM
Pentode
 
Join Date: Mar 2022
Location: Harrow, Middlesex, UK.
Posts: 225
Default Amplifier with home brew bright emitter valves

YouTube happened to offer me this, and I think it deserves a link on here. I'm not sure whether this is the right section, because the project is not mine, but it's as home brew as can be. Mods please move if there's a more appropriate section.
https://www.youtube.com/watch?v=-UEfqAWb3fE
RichardGM is offline  
Old 2nd Nov 2022, 10:39 am   #14
RichardGM
Pentode
 
Join Date: Mar 2022
Location: Harrow, Middlesex, UK.
Posts: 225
Default Re: Homemade amplifier with homemade valves

I did wonder whether someone had already posted this but couldn't think what to search for.
RichardGM is offline  
Old 3rd Nov 2022, 6:25 am   #15
FrankB
Heptode
 
Join Date: Oct 2005
Location: Olympia, Washington, USA.
Posts: 663
Default Re: Homemade amplifier with homemade valves

I believe the vacuum is most likely a 2 stage mercury pump. We used them in a class for making neon tubes.

(One can't safely repair neon tubes, as they generally inject a tiny ball of mercury into the tube to brighten or change the colors).

John- They do cut open transmitting tubes and replace the filament and cathode, add a new getter and then pump the tube down, reseal them, and flash the getter.
Eimac and Delta do/did this, IIRC. I repaired RF welding machines back in the 70's and we would send the tubes in to either be tested if the owner wanted to know his backup was good, or they could rebuild them.
Note: Never cut or grind the ceramic materialon a ceramic tube as it contains Beryllium in the ceramic which according to mfgr's. inhaling the dust of the ceramic material is deadly.
The process is almost identical to that of rebuilding a CRT, which has been done here for decades.
FrankB is offline  
Old 13th Nov 2022, 9:35 am   #16
peter_scott
Dekatron
 
peter_scott's Avatar
 
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 3,273
Default Re: Amplifier with home brew bright emitter valves

Quote:
Originally Posted by RichardGM View Post
YouTube happened to offer me this, and I think it deserves a link on here. I'm not sure whether this is the right section, because the project is not mine, but it's as home brew as can be. Mods please move if there's a more appropriate section.
https://www.youtube.com/watch?v=-UEfqAWb3fE
I was interested to see that he just uses a propane torch for his glasswork.

Peter.
peter_scott is offline  
Old 15th Nov 2022, 9:09 am   #17
raditechman
Heptode
 
raditechman's Avatar
 
Join Date: Feb 2007
Location: West London, UK.
Posts: 865
Default Making valves and an amplifier

A home made amplifier with home made valves in this video, which shows how the valves were made.

https://www.youtube.com/watch?v=-UEfqAWb3fE

John
raditechman is offline  
Old 30th Dec 2022, 2:04 pm   #18
Guest
Guest
 
Posts: n/a
Default Amazing video handmade tubes

He makes even the tubes


https://youtu.be/-UEfqAWb3fE
 
Closed Thread

Thread Tools



All times are GMT +1. The time now is 8:53 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.