UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Audio (record players, hi-fi etc)

Notices

Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment.

Closed Thread
 
Thread Tools
Old 3rd Jul 2022, 4:26 pm   #41
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

Could I be that unlucky...worth a try I guess..
mikes08 is offline  
Old 3rd Jul 2022, 11:22 pm   #42
PJL
Dekatron
 
Join Date: Sep 2005
Location: Seaford, East Sussex, UK.
Posts: 5,997
Default Re: Quad 303 pop on switch on

Electrolytic capacitors that have been stored for a few years may need reforming.
PJL is offline  
Old 4th Jul 2022, 7:43 am   #43
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

Many thanks
I will order a couple of new caps to replace the Epcos ones and give that a go.
If i replaced the possible defective one with the known good I took out would it create a problem to have one 10,000mf and one 12,000mf in the amp just for testing purposes?
Sorry for all the questions - just learning as i go along.
mikes08 is offline  
Old 4th Jul 2022, 7:50 am   #44
stevehertz
Dekatron
 
stevehertz's Avatar
 
Join Date: Sep 2011
Location: Rugeley, Staffordshire, UK.
Posts: 8,809
Default Re: Quad 303 pop on switch on

No, they're separate circuits.
__________________
A digital radio is the latest thing, but a vintage wireless is forever..
stevehertz is offline  
Old 4th Jul 2022, 7:51 am   #45
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

Thanks Steve
Will try that and if it solves it i know i need to order a couple of new caps.
mikes08 is offline  
Old 4th Jul 2022, 8:58 am   #46
vidjoman
Dekatron
 
Join Date: Jun 2013
Location: East Sussex, UK.
Posts: 3,315
Default Re: Quad 303 pop on switch on

I thought the original 303 used 2,000 mfd caps. Surely increasing to 5 times the capacitance will increase the switch-on charging current and possibly lead to a thump as the cap is charged.
vidjoman is offline  
Old 4th Jul 2022, 11:01 am   #47
radio69
Tetrode
 
Join Date: May 2022
Location: Hangleton, (Hove) East Sussex. UK.
Posts: 61
Default Re: Quad 303 pop on switch on

Yes, the original used two in number, 2,000uF caps.

So are you using two 10,000uF in parallel ? That's insane. Especially with a regulator downstream.

I take it this relates to the modern obsession of so-called 'upgrades' to everything. Many of which are not.

Peter Walker and Mike Albinson knew what they were doing, leave it as it was.

My own 303 works perfectly well as it was when it left the factory.
radio69 is offline  
Old 4th Jul 2022, 11:15 am   #48
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

Many thanks - That is standard upgrade with Dada kit and works fine in my other two 303's that I have done. It is just problem with one channel here. I could reduce them to 4700mf if replacing. Not a thump but more of a higher frequency 'pop/crack' the thumps i can live with but this is slightly different. The difference once done is audible noticeable.
mikes08 is offline  
Old 4th Jul 2022, 11:24 am   #49
Goldieoldie
Octode
 
Join Date: Jul 2014
Location: Petersfield, Hampshire, UK.
Posts: 1,043
Default Re: Quad 303 pop on switch on

If the amp is working fine except for this problem could you fit a simple 555 with a very short delay circuit triggered on switch on with a relay in series with the speakers ?
Goldieoldie is offline  
Old 4th Jul 2022, 12:46 pm   #50
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,803
Default Re: Quad 303 pop on switch on

It might be the only audible clue that something bad is happening, like the burst of spurious oscillation mentioned earlier as a possibility. Calling it "A higher frequency pop/crack" seems to play towards this possibility.

I'd want to look with a scope and see what's going on.

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is offline  
Old 4th Jul 2022, 1:00 pm   #51
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

Thanks David
I can take it out of service as i have others. Just strange symptoms i have not had with the other two. All my quiescent voltages check out fine.
I have ordered two new 4700mf Epcos caps for the output side just in case it is that .
The odd thing is that the 'pop' changed from right to left channel yesterday after swapping the existing caps over. The amp is on now and works fine after the initial problem and if turned off and on again once fired up for the day it doesn't create any noise. I am assuming that is due to the capacitors charging up and not depleting say overnight.
Unfortunately no scope unless there is a member on here close to Canterbury who could assist. I could also look and see if any audio repairs near here.
mikes08 is offline  
Old 4th Jul 2022, 3:02 pm   #52
PJL
Dekatron
 
Join Date: Sep 2005
Location: Seaford, East Sussex, UK.
Posts: 5,997
Default Re: Quad 303 pop on switch on

There is more energy stored in the output capacitors than the PSU which sounds like a recipe for instability.
PJL is offline  
Old 4th Jul 2022, 3:55 pm   #53
stevehertz
Dekatron
 
stevehertz's Avatar
 
Join Date: Sep 2011
Location: Rugeley, Staffordshire, UK.
Posts: 8,809
Default Re: Quad 303 pop on switch on

Sounds to me like the value of the caps is too high. Generally it's not advisable to 'improve' on smoothing cap values by too much, especially in valve circuits which ok, is not the case here. But you're increasing the value five-fold? I'd stick with stock or maybe double at most. It may well be a 'quirk' of the circuitry that nine times out of ten the combination will work, but maybe it's a case of the exception proving the rule, as what you are experiencing?
__________________
A digital radio is the latest thing, but a vintage wireless is forever..
stevehertz is offline  
Old 5th Jul 2022, 7:51 am   #54
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

Thanks Steve and all.
I have ordered some 4700mf caps to replace the current ones so will try those. As you note it could just be an anomaly with this particular amp. Will report back when they arrive and have been fitted. I have taken out of service for now. More concerned about my BC1 bass units going pop....still it is keeping me occupied.
mikes08 is offline  
Old 5th Jul 2022, 8:53 am   #55
stevehertz
Dekatron
 
stevehertz's Avatar
 
Join Date: Sep 2011
Location: Rugeley, Staffordshire, UK.
Posts: 8,809
Default Re: Quad 303 pop on switch on

Do not damage a BC1! That is a punishable offence!
__________________
A digital radio is the latest thing, but a vintage wireless is forever..
stevehertz is offline  
Old 5th Jul 2022, 1:01 pm   #56
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

Quote:
Originally Posted by stevehertz View Post
Do not damage a BC1! That is a punishable offence!
I know....
mikes08 is offline  
Old 24th Jul 2022, 9:14 am   #57
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

A quick update now - i have replaced TR1 with a spare genuine RCA one I had and have now replaced the output capacitors with 4700mf - it still pops in one channel(left) on first turn on but is more muted now so I guess related to the capacitors. It is less alarming now so will leave at that but still curious why it should be an anomaly with this amp and not the others. In the interim i have acquired some high end Dada boards via e bay. One board has a fault which i am working through but will start another thread on that.
Attached Thumbnails
Click image for larger version

Name:	Dada high end.jpg
Views:	70
Size:	117.6 KB
ID:	261427  
mikes08 is offline  
Old 24th Jul 2022, 9:33 am   #58
Craig Sawyers
Dekatron
 
Craig Sawyers's Avatar
 
Join Date: Nov 2010
Location: Oxford, UK.
Posts: 4,942
Default Re: Quad 303 pop on switch on

Since DADA say "Completely tested & calibrated with professional lab-equipment" and "1 year full warrantee", surely that is your first port of call if there is a fault with one board?

Craig
__________________
Doomed for a certain term to walk the night
Craig Sawyers is online now  
Old 24th Jul 2022, 9:37 am   #59
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

Hi Craig
Bought second hand and listed as one resistor will need replacing - it had burnt out but there appears to be more than this.
I don't know how old they are though - no serial numbers either.
I will start a separate thread on this.
mikes08 is offline  
Old 29th Jul 2022, 7:50 am   #60
mikes08
Pentode
 
mikes08's Avatar
 
Join Date: Dec 2021
Location: Canterbury, Kent, UK.
Posts: 133
Default Re: Quad 303 pop on switch on

Now resolved - having replaced the boards - see my other thread - with Dada high end boards the pop on turn on has now gone.
I had replaced TR1 to no effect so wonder if it might be on the regulator board after all so will investigate that further. Odd though as only affected one channel.
mikes08 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 3:58 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.