|
Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets. |
|
Thread Tools |
24th Oct 2021, 5:32 pm | #1 |
Pentode
Join Date: May 2011
Location: Cardigan, Ceredigion, UK.
Posts: 100
|
Identification please.
Hi, I'm trying to sort out some bits I've accumulated over the years and I've got stuck over 5 of the following modules. They were obtained from stall at a county show a couple of years ago. As can be seen it is made by PCI in Singapore and the only other number on it is OEM-2U on the side of the Bezel. It has a DVM look about it. the only other clue is that it was in a box containing some RS components so maybe it had a label that has come off. Unfortunately RS Components don't seem to hold any records of their discontinued parts which makes it difficult trying to repair equipment containing ICs etc only marked with RS numbers! Rant over. Anyway if anyone can help identify it, I will send one to the first correct reply.
Regards, John. |
24th Oct 2021, 5:44 pm | #2 |
Heptode
Join Date: Oct 2011
Location: Culcheth, Cheshire, UK.
Posts: 637
|
Re: Identification please.
|
24th Oct 2021, 6:57 pm | #3 |
Octode
Join Date: Jul 2009
Location: Cheshire, UK.
Posts: 1,706
|
Re: Identification please.
Possibly 258-041, the picture in the RS 1984 book shows the same track layout below the LCD, RS datasheet to look for is 5106.
David |
25th Oct 2021, 6:32 am | #4 |
Dekatron
Join Date: Jul 2009
Location: Sleaford, Lincs. UK.
Posts: 7,639
|
Re: Identification please.
Pull the IC datasheet and application note for more info, same goes for the LCDif theres a number,
__________________
Curiosity hasn't killed this cat...so far. |