UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Computers

Notices

Vintage Computers Any vintage computer systems, calculators, video games etc., but with an emphasis on 1980s and earlier equipment.

Closed Thread
 
Thread Tools
Old 28th Jun 2008, 8:25 pm   #1
Denwynne
Retired Dormant Member
 
Join Date: Jun 2008
Location: Taunton UK
Posts: 10
Default Tatung Monitor

I have a Tatung monitor which i use with a BBC B, the screen is off centre and i can find no ajustment on the monitor except for colour, contrast and brightness on the back, is there a way to alter the horizontal and vertical hold at all. Picture is fine just the position is out
Denwynne is offline  
Old 29th Jun 2008, 11:56 am   #2
Skywave
Rest in Peace
 
Join Date: Jun 2006
Location: Chard, South Somerset, UK.
Posts: 7,457
Exclamation Re: Tatung Monitor

Such 'hold' controls are not the adjustments you are looking for. Inside the monitor, however, you might just find a horizontal shift control or a jumper that can be set to a number of different positions.

Warning.
Unless you are experienced with servicing and adjusting such montors with the covers off, you need to take great care - there a lots of high voltages in there and you can very easily get a nasty high voltage shock - which could be fatal.

Al / Skywave.
Skywave is offline  
Closed Thread




All times are GMT +1. The time now is 8:32 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.