Dynatron (Pye 697 chassis) - frame collapse - Page 2 - UK Vintage Radio Repair and Restoration Discussion Forum

Focus Diode · 23rd Apr 2007, 9:31 pm

Good idea to change the elecs on the FTB panel.

The Callins I noticed on your photo is C371 (4uF 350V) on the CDA panel. I see that C367 (also 4uF 350V) has already been replaced!

Cheers,
Brian

Mike Phelan · 24th Apr 2007, 7:38 am

Tas
Not really contacts per se, but just the earth print on the CDA panel.
There is also an electrolytic on the convergence panel - chassis return for the frame scan coils - that will give lack of height. 400mfd? Sorry, I've no circuit.
Callins - aarrrggghhh!

23rd Apr 2007, 9:31 pm	#21
Focus Diode Octode Join Date: Jan 2006 Location: Borough of Gateshead, UK. Posts: 1,420	Re: Dynatron (Pye 697 chassis) - Any ideas? Good idea to change the elecs on the FTB panel. The Callins I noticed on your photo is C371 (4uF 350V) on the CDA panel. I see that C367 (also 4uF 350V) has already been replaced! Cheers, Brian

24th Apr 2007, 7:38 am	#22
Mike Phelan Dekatron Join Date: Nov 2003 Location: Near Leeds, West Yorkshire, UK Posts: 4,609	Re: Dynatron (Pye 697 chassis) - Any ideas? Tas Not really contacts per se, but just the earth print on the CDA panel. There is also an electrolytic on the convergence panel - chassis return for the frame scan coils - that will give lack of height. 400mfd? Sorry, I've no circuit. Callins - aarrrggghhh! __________________ Mike.