|
|
|
|
|||||||
| Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment. |
 |
|
|
Thread Tools |
5th Oct 2022, 7:29 pm
|
#1 |
|
Diode
Join Date: Mar 2020
Location: Northumberland, UK.
Posts: 3
|
Teleton F2000
Hello.
Looking for some help please . I need a schematic/ circuit diagram to repair this amp from 1974. Fault; I have 1 channel faulty. It’s a preamp issue , checked the output stage by injecting a signal in and proved ok. It’s extremely difficult to access the preamp board, I have done this and replace several caps the where either faulty or well out of tolerance. Unable to fault find while preamp board is partly out. Any service information would be great full for. Many thanks. Paul |
|
|
5th Oct 2022, 7:56 pm
|
#2 |
|
Dekatron
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 6,603
|
Re: Teleton F2000
Paul, check my reply to your previous request for this.
https://www.vintage-radio.net/forum/...d.php?t=194865. David |
|
|
|
6th Oct 2022, 4:28 pm
|
#3 |
|
Dekatron
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 6,603
|
Re: Teleton F2000
Now have found my hardcopy manual which I will scan, this manual is in English as opposed to German for the PDF version, the information within is very similar but not always identical. As per the PDF manual, the schematic in the hardcopy manual also does not show component values.
David |
|
|
|
9th Oct 2022, 10:31 pm
|
#4 |
|
Dekatron
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 6,603
|
Re: Teleton F2000
Emailed scanned copies of the English manual pages.
David |
|
|
