UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > General Vintage Technology Discussions

Notices

General Vintage Technology Discussions For general discussions about vintage radio and other vintage electronics etc.

Closed Thread
 
Thread Tools
Old 14th Feb 2020, 10:11 pm   #1
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default 1950's Speaker Connection Plug

Good evening all,

Would you please let me know the correct name of the connectors/plugs that I have attached.

Is it possible to rewire them or is it not possible unable to separate/unscrew?

Thank you.
Attached Thumbnails
Click image for larger version

Name:	thumbnail_20200214_205924.jpg
Views:	403
Size:	81.1 KB
ID:	198995  
BrianAllen is offline  
Old 14th Feb 2020, 10:16 pm   #2
G6Tanuki
Dekatron
 
G6Tanuki's Avatar
 
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 13,953
Default Re: 1950's Speaker Connection Plug

They're "Wander plugs".

Now alas extinct as a new-purchase, but a trawl of the usual online auction-sites will no doubt come up trumps.

The most-popular brand making these was 'Clix'.

In your case, try fitting something like a knife-blade into the gap between the two 'legs' of the plug-part, then unscrewing the plastic body. if you're lucky it will unscrew and then you can fit a new wire. If you're unlucky the plastic part will have become brittle with age and will crunble/split when you try to un-screw it.
G6Tanuki is offline  
Old 14th Feb 2020, 10:19 pm   #3
Boulevardier
Octode
 
Join Date: Sep 2017
Location: Bristol, UK.
Posts: 1,642
Default Re: 1950's Speaker Connection Plug

They are easy to rewire - the metal bit unscrews from the plastic bit, and then it's pretty obvious how to connect the flex.

Mike
Boulevardier is offline  
Old 14th Feb 2020, 10:50 pm   #4
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default Re: 1950's Speaker Connection Plug

Thank you, didn't want to damage them, so thought I would check first.

Yes, as you say, they are Clix.
BrianAllen is offline  
Old 14th Feb 2020, 10:59 pm   #5
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default Re: 1950's Speaker Connection Plug

All done; quality products in those days.
Attached Thumbnails
Click image for larger version

Name:	20200214_215327.jpg
Views:	291
Size:	50.0 KB
ID:	198997  
BrianAllen is offline  
Old 14th Feb 2020, 11:02 pm   #6
Hartley118
Nonode
 
Hartley118's Avatar
 
Join Date: Aug 2015
Location: Cambridge, Cambs. UK.
Posts: 2,196
Default Re: 1950's Speaker Connection Plug

Rather than the common 4mm plugs, wander plugs are 3mm.

Not sure what caused this handy size to go obsolete.

Martin
__________________
BVWS Member
Hartley118 is online now  
Old 14th Feb 2020, 11:24 pm   #7
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default Re: 1950's Speaker Connection Plug

I note that the speaker core wires are steel; when did they start to use copper wire?
BrianAllen is offline  
Old 14th Feb 2020, 11:26 pm   #8
Cobaltblue
Moderator
 
Cobaltblue's Avatar
 
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,824
Default Re: 1950's Speaker Connection Plug

Are you sure its steel ?

Most of this sort of wire is tinned copper.

Cheers

Mike T
__________________
Invisible airwaves crackle with life or at least they used to
Mike T BVWS member.
www.cossor.co.uk
Cobaltblue is online now  
Old 14th Feb 2020, 11:37 pm   #9
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default Re: 1950's Speaker Connection Plug

Ah, that it explains it; must be tinned copper.

Thanks Mike
BrianAllen is offline  
Old 15th Feb 2020, 11:46 pm   #10
Herald1360
Dekatron
 
Herald1360's Avatar
 
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,528
Default Re: 1950's Speaker Connection Plug

Quote:
Originally Posted by Hartley118 View Post
Rather than the common 4mm plugs, wander plugs are 3mm.

Not sure what caused this handy size to go obsolete.

Martin
Aren't they 1/8" rather than 3mm?

3mm plugs (still available) will fit well enough usually.
__________________
....__________
....|____||__|__\_____
.=.| _---\__|__|_---_|.
.........O..Chris....O
Herald1360 is offline  
Old 16th Feb 2020, 12:03 am   #11
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default Re: 1950's Speaker Connection Plug

A good little business for someone in China; these plugs are selling for £12 each on eBay!!!!
BrianAllen is offline  
Old 16th Feb 2020, 12:15 am   #12
emeritus
Dekatron
 
Join Date: Jan 2012
Location: Brentwood, Essex, UK.
Posts: 5,316
Default Re: 1950's Speaker Connection Plug

Tinning was necessary with the old rubber-insulated wires because the sulphur that was present in the rubber would attack bare copper. Tinning continued to be used when plastic first replaced rubber. Presumably its general use ceased once it was realised that modern plastics such as PVC do not attack bare copper.

Last edited by emeritus; 16th Feb 2020 at 12:20 am.
emeritus is offline  
Old 16th Feb 2020, 12:57 am   #13
AC/HL
Dekatron
 
AC/HL's Avatar
 
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,637
Default Re: 1950's Speaker Connection Plug

It was sometimes also used with single insulated twin cable to differentiate the cores. The plugs would have been 1/8 rather than 3mm back then.
AC/HL is offline  
Old 16th Feb 2020, 2:37 pm   #14
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default Re: 1950's Speaker Connection Plug

On closer inspection, I can now see that the speaker wires with the tinned wire are actually rubber.

I don't particularly want to replace everything inside the radio as would like to keep as much of the original as possible but would you recommend changing the speaker wires with new?
BrianAllen is offline  
Old 16th Feb 2020, 3:48 pm   #15
Hartley118
Nonode
 
Hartley118's Avatar
 
Join Date: Aug 2015
Location: Cambridge, Cambs. UK.
Posts: 2,196
Default Re: 1950's Speaker Connection Plug

Quote:
Originally Posted by Herald1360 View Post
Quote:
Originally Posted by Hartley118 View Post
Rather than the common 4mm plugs, wander plugs are 3mm.

Not sure what caused this handy size to go obsolete.

Martin
Aren't they 1/8" rather than 3mm?

3mm plugs (still available) will fit well enough usually.
Apologies: should have specified 3.175mm.

And yes, 3mm plugs are available from China on eBay, though I don't think there's any current electronics kit using them.

Martin
__________________
BVWS Member
Hartley118 is online now  
Old 16th Feb 2020, 4:28 pm   #16
broadgage
Nonode
 
Join Date: Jan 2010
Location: North Somerset, UK.
Posts: 2,129
Default Re: 1950's Speaker Connection Plug

Quote:
Originally Posted by Hartley118 View Post
Rather than the common 4mm plugs, wander plugs are 3mm.

Not sure what caused this handy size to go obsolete.

Martin
I was told that use was discouraged, and perhaps actually prohibited, because the plugs fitted the mains voltage selector on some sets.
One common type of mains voltage adjustment used a small 2 pin plug, with the 2 pins connected together. By inserting the plug into different combinations of holes, differing tappings on a transformer or dropper resistance could be selected.
Connecting a speaker to these connections could be most dangerous.

The larger 4mm plugs were I believe also banned for domestic equipment because the plugs fit European mains sockets.
4mm plugs are still used in labs and workshops, but are not allowed on new domestic appliances.
broadgage is offline  
Old 16th Feb 2020, 4:29 pm   #17
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default Re: 1950's Speaker Connection Plug

Hi Martin,

I was referring to Chinese manufacturing the wander plugs.

Brian
BrianAllen is offline  
Old 17th Feb 2020, 8:24 pm   #18
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default Rubber/PVC Speaker Wires

This question was lost in a previous thread, so apologies for posting again.

On closer inspection, I can now see that the speaker wires with the tinned wire are actually rubber.

I don't particularly want to replace everything inside the radio as would like to keep as much of the original as possible but would you recommend changing the speaker wires with new?

Thank you.
BrianAllen is offline  
Old 18th Feb 2020, 12:34 pm   #19
Herald1360
Dekatron
 
Herald1360's Avatar
 
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,528
Default Re: 1950's Speaker Connection Plug

Only if the insulation is in poor condition or maybe just cosmetically bad. One big difference between valve and transistor equipment is that shorted speaker outputs generally don't upset valve equipment though open circuits may well do, vice versa for transistor gear.
__________________
....__________
....|____||__|__\_____
.=.| _---\__|__|_---_|.
.........O..Chris....O
Herald1360 is offline  
Old 18th Feb 2020, 5:31 pm   #20
BrianAllen
Heptode
 
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
Default Re: 1950's Speaker Connection Plug

Thanks Chris.

Brian
BrianAllen is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 1:54 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.