|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
5th Jan 2024, 8:14 pm | #1 |
Diode
Join Date: Jan 2024
Location: Newbury, West Berkshire, UK
Posts: 2
|
Can anyone identify this old Marconi radio please?
Hi all, I have been emptying out my late father-in-law's sheds and found two military valve radios. One is an AR88D (which I am hoping to get working properly again with lots of help from the threads on here, thanks guys!), the other I cannot find anything like it so was hoping someone could help me identify it before it get's thrown in the scrap metal pile!
I have a picture of the front panel, marked 'Marconi receiver Type RS4' but a Google picture search turns up only old power supplies I prized the case open at the top and inside are 4? 5? anode cap valves. It was too dirty to identify any markings unfortunately. I'd guess from the valve design it's 1930s? Couple of switches smashed off, tuning is seized, wiring rotted, not in a good way I'm just curious to know what is is and if I should bother trying to save this one or not! TIA Stuart Last edited by Cobaltblue; 5th Jan 2024 at 8:44 pm. Reason: added pic to post |
5th Jan 2024, 8:51 pm | #2 |
Octode
Join Date: Jul 2018
Location: Worthing, West Sussex, UK.
Posts: 1,008
|
Re: Can anyone identify this old Marconi radio please?
Well worth saving, being so old, it is real history. Marconi were the biz, always had a lot of respect for them.
__________________
"Behind every crowd, there's a silver Moonshine" |
5th Jan 2024, 8:52 pm | #3 |
Moderator
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,882
|
Re: Can anyone identify this old Marconi radio please?
Hi Stuart and welcome to the forum.
I have moved your picture into the thread as links get broken over time. Hopefully someone recognises the set would it be possible to get a close up of the Brass plate? Cheers Mike T
__________________
Invisible airwaves crackle with life or at least they used to Mike T BVWS member. www.cossor.co.uk |
5th Jan 2024, 10:03 pm | #4 |
Dekatron
Join Date: Nov 2011
Location: Surrey, UK.
Posts: 4,400
|
Re: Can anyone identify this old Marconi radio please?
Hi and welcome.
Definitely worth restoring that set- there were plenty of wartime sets made and many survived post-war to displace those earlier sets that were made in much smaller numbers anyway, so those that survive are certainly significant and worthwhile. From the beginning of the 1930s to the end was a period when sub-30MHz radio technology markedly evolved and matured, so a set like this will provoke a good deal of interest here. Good luck with it, Colin |
6th Jan 2024, 1:23 am | #5 |
Dekatron
Join Date: Jan 2006
Location: Ramsbottom (Nr Bury) Lancs or Bexhill (Nr Hastings) Sussex.
Posts: 5,817
|
Re: Can anyone identify this old Marconi radio please?
Hello and please tell us, perhaps, what you know Stuart, re your own technical knowledge [you would seem to have some] and maybe what your Father in Law was up to with those sheds? Trust me, we often find out an amazing Wartime History from individuals, with a link to the Forum. Don't rush to throw things out without consultation. The info available on here is extraordinary and often the smallest item, down to components or screws, is invaluable to someone. I've benefitted from that myself
My own personal search involves the Marconi Station at Newhaven [Circa 1909] much earlier than what you have found but the 1930's were quite amazing and progressive in themselves. Good luck with the AR88, they were very much in demand a decade ago and there is no end of info here Dave W |
6th Jan 2024, 1:20 pm | #6 |
Pentode
Join Date: Apr 2011
Location: Swansea, Wales, UK.
Posts: 144
|
Re: Can anyone identify this old Marconi radio please?
Looks like a 5 band receiver, CW/phone. I can't read the left hand knob. Maybe for Marine use with a DF loop. Some more pictures would be interesting.
73, Andrew |
6th Jan 2024, 1:49 pm | #7 |
Dekatron
Join Date: Dec 2004
Location: East Yorkshire, UK.
Posts: 3,990
|
Re: Can anyone identify this old Marconi radio please?
RS4?
__________________
My favourite text message "I'll be there in five minutes, if not read again" |
6th Jan 2024, 11:22 pm | #8 |
Nonode
Join Date: Jun 2007
Location: Coulsdon, London, UK.
Posts: 2,173
|
Re: Can anyone identify this old Marconi radio please?
Any chance of a close up photo of the brass identification plate and a photo of the internals?
The receiver may have been modified over the last 80 years. |
7th Jan 2024, 12:40 pm | #9 |
Heptode
Join Date: Apr 2010
Location: West Midlands, UK.
Posts: 663
|
Re: Can anyone identify this old Marconi radio please?
Definitely worth saving, a very rare set now.
Louis Meulstee's "Wireless for the Warrior Compendium 2" has a picture and information on the Marconi RS5E which looks very similar in appearance and was used by the British army. |
6th Mar 2024, 8:33 pm | #10 |
Diode
Join Date: Jan 2024
Location: Newbury, West Berkshire, UK
Posts: 2
|
Re: Can anyone identify this old Marconi radio please?
Hi all - thanks so much for the feedback. I have been busy with other things so not visited here for a while..
I have finally managed to get the Marconi unit from the shed in Cornwall to my house, so we can take a proper look at it ( along with some other badly corroded valve HiFi! ) and it does look very much like the RS5E shown here: http://www.wftw.nl/rsets.html I have no idea what it was doing in the back of the shed - my late father-in-law was a bit of a hoarder but perhaps these came from a relative who we know was into 'wireless' during the war and later thereafter. Anyway, here are some more photo's; inside is mildewed and dusty/dirty but not much corrosion, so holding out hope the wound components are OK. Big plus, I found a wiring diagram in the case! Valve parts are: KTW21MET x 3, X.21, LP2, HD22MET, HL22MET and KT2. I guess that dates it to pre-early WW2, 1937 onward? Some work has clearly been done already (output txfmr bolts are not straight and suspiciously shiny) and there is a mix of valve brands (Osram, Marconi, Cossor.) One of the coated valves appears to have decayed externally, and is not inserted in the socket fully. Hmm. There is no PSU. It needs LT and HT supplies, perhaps there is/was a separate PSU somewhere? Stu PS: a bit about me - recently retired radio and IT engineer working in telecoms then digital TV, electronic hobbyist as a kid and spent my early years playing with TVs, radiograms, reel-to-reel tape units and whatnot. usually converting them guitar amps and effect units! |
10th Mar 2024, 11:06 pm | #11 |
Nonode
Join Date: Dec 2012
Location: Stockport, Greater Manchester, UK.
Posts: 2,122
|
Re: Can anyone identify this old Marconi radio please?
Ooh that's lovely, pity it's so corroded; a simple communications receiver with one RF stage. What is the frequency coverage?
It reminds me of a Marconi Marine receiver from the 50s, the Marconi Gannet which had a separate PSU chassis but mounted in the same cabinet with the receiver
__________________
- Julian It's good here |
19th Mar 2024, 12:35 pm | #12 |
Heptode
Join Date: Apr 2010
Location: West Midlands, UK.
Posts: 663
|
Re: Can anyone identify this old Marconi radio please?
Looks like the set was intended to be powered by an HT dry battery and a 2 volt accumulator for the valve filaments,
Mike. |
20th Mar 2024, 7:35 pm | #13 |
Nonode
Join Date: Jun 2007
Location: Coulsdon, London, UK.
Posts: 2,173
|
Re: Can anyone identify this old Marconi radio please?
Please look after that schematic.
It may be the only one in existence. I am sure that several members of the forum would be interested in a readable scan of that document. |