UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Cabinet and Chassis Restoration and Refinishing

Notices

Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here.

Closed Thread
 
Thread Tools
Old 27th Oct 2021, 12:44 pm   #1
HECTOR63
Banned
 
Join Date: Feb 2017
Location: Bedfordshire, UK.
Posts: 601
Default Naim amplifier Case restore and cleaning etc

We have a couple coming in shortly with very light marks due to being stacked and when moved on one case a very light 'Drag Mark' so to type. I shall post up pics later when they arrive after inspection etc. I believe they might be lightly powder coated or something of that nature? Anyone have any experiences or methods of suitable and reasonable to good quality advices or service experiences they would care to share on this subject would be greatly appreciated.
HECTOR63 is offline  
Old 27th Oct 2021, 3:25 pm   #2
Petedox
Pentode
 
Petedox's Avatar
 
Join Date: Feb 2020
Location: Waterlooville, Hampshire, UK.
Posts: 200
Default Re: Naim amplifier Case restore and cleaning etc

Hi Hector, I've had this problem many times, often when hifi separates have been mounted on top of each other leading to scuffs, marks and light scratches etc.

To re-powder coat is normally out of the question due to the amount of preparation, baking, time and cost involved.

So whether it's painted or powdercoated I always use a can of spray paint colour matched by our local auto factors (Express Paints in my area). They can match the colour exactly for around £12 in an aerosol, normally while you wait.

I give the case a clean clean in soapy water / IPA (that often removes most of the marks anyway), and lightly key it with Scotchbrite or similar. When completely dry you generally need only the lightest dusting of spray paint over the case to bring it back to 'as new' condition.

Also small scatches can normally be filled with Knifing putty.
__________________
Pete
BVWS Member
Petedox is offline  
Old 27th Oct 2021, 4:21 pm   #3
HECTOR63
Banned
 
Join Date: Feb 2017
Location: Bedfordshire, UK.
Posts: 601
Default Re: Naim amplifier Case restore and cleaning etc

Hi PeteDox

many thanks for the reply and advices,we shall take a look at those and give them a try
HECTOR63 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 11:15 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.