|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
26th Nov 2017, 1:17 am | #1 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Sanyo VTC 5000 SY-2 board question
Hi. Since my good old VTC 5000 needs a new function key/timer PCB as it's cracked, I think it's time to get a new one. My question is, is the board on the continental (PAL B/G) model the same as the UK (PAL I) one? I know the Australian one is different.
Thanks in advance Fivos |
26th Nov 2017, 10:49 am | #2 |
Octode
Join Date: Feb 2007
Location: Harrow, London, UK.
Posts: 1,493
|
Re: Sanyo VTC 5000 SY-2 board question
The fact that the IF response is different between UK system I and continental Europe B/G would not in itself change the front panel design.
The difference would be the pre-set tuner having both VHF and UHF channels available. This is born out should you visit ebay Europe where you will note the model is known as VTC 5000P. The front panel instructions are printed in English whilst the user instructions are in the national language. The Austrailian version, known as the VTC 5000-11, from again looking at ebay, appears to have the Video/Tuner switch duplicated? as a front panel option. Hope this helps Chris |
26th Nov 2017, 2:49 pm | #3 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: Sanyo VTC 5000 SY-2 board question
Hi Chris. Thanks for your answer. I don't think a VTC 5000P exists. There's a VTC 5300P and a 5300PB according to my service manuals. My 5000 just says VTC 5000 on the back without the "P", just like the UK model. I have the original owner's manual and it's in English and German languages.
Regards, Fivos |
26th Nov 2017, 6:28 pm | #4 |
Octode
Join Date: Feb 2007
Location: Harrow, London, UK.
Posts: 1,493
|
Re: Sanyo VTC 5000 SY-2 board question
Hi Fivos
Thank you for correcting me. There is also a VTC5400P which adds audio dubbing to the VTC 5000. Chris |
26th Nov 2017, 7:57 pm | #5 | |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: Sanyo VTC 5000 SY-2 board question
Quote:
|
|