|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
23rd Jul 2021, 1:57 pm | #1 |
Banned
Join Date: Feb 2017
Location: Bedfordshire, UK.
Posts: 601
|
B&O wood damaged casing repair advices
Possible restorable project but any advises on cabinet repir to restore and recover from woodwork issues as per picture.
|
23rd Jul 2021, 2:08 pm | #2 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,970
|
Re: B&O wood damaged casing repair advices
Ouch.
Probably easiest and most effective to make a new wooden panel, though matching the veneers won't be easy. You could try to find a scrap unit and make one good case out of the two. |
23rd Jul 2021, 2:51 pm | #3 |
Dekatron
Join Date: Apr 2005
Location: North Wales, UK.
Posts: 6,928
|
Re: B&O wood damaged casing repair advices
I'd be tempted to use two-pack wood filler to make the corner, flatten off then key the whole area and attach new veneer.
|
25th Jul 2021, 8:59 am | #4 |
Banned
Join Date: Feb 2017
Location: Bedfordshire, UK.
Posts: 601
|
Re: B&O wood damaged casing repair advices
Many thanks for the advices-yes theres some great advices there,just to ask if I was to attempt a full top panel replacement im assuming its going to need some good woodworking tooling to cut the board via a template scored from the original to allow for the cassette deck lid etc opening.
|
25th Jul 2021, 9:49 am | #5 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,970
|
Re: B&O wood damaged casing repair advices
Exactly how you would make it will depend on your skills and the facilities available. The original is probably veneered plywood. It should be possible to cut the openings with an ordinary coping saw with care, though there are fancier tools available.
|
25th Jul 2021, 10:21 am | #6 |
Banned
Join Date: Feb 2017
Location: Bedfordshire, UK.
Posts: 601
|
Re: B&O wood damaged casing repair advices
Many Thanks Paul yes im okay with wood works but have no workshop facility for it. But I have a colleague that may be able to help with the more demanding tooling as it will need to be as square as possible etc with the cuts. Thanks for the Plywood advice asw ell, may well be taking that direction and complete with the sides to match.
|
25th Jul 2021, 11:28 am | #7 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,289
|
Re: B&O wood damaged casing repair advices
Looks more like veneered chip board to me.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
25th Jul 2021, 11:37 am | #8 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,970
|
Re: B&O wood damaged casing repair advices
Yes, you're right. Plywood could be used as a replacement of course.
|
25th Jul 2021, 5:33 pm | #9 |
Hexode
Join Date: Mar 2014
Location: Sells Green, Wiltshire, UK.
Posts: 315
|
Re: B&O wood damaged casing repair advices
I agree with Glyn, repair the damage and then apply new veneer, easier than making a new panel.
|