UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms

Notices

Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Closed Thread
 
Thread Tools
Old 27th Nov 2021, 8:26 pm   #1
Des Miles
Triode
 
Join Date: Jan 2006
Location: Port Elizabeth, South Africa
Posts: 15
Default Morse inker.

Definitely not telephony, maybe Telecomms. Mods please delete if necessary.
Unearthed after being squirreled away for +/- 40 years ago (in my garage rafters) that I had actually completely forgotten about! The instrument had actually been used in the Walvis Bay maritime radio station (ZSV). The station was first operated by the Germans (German South West Africa) and then by RSA - Namibia after it was liberated end of WW2.
The instrument as manufactured by "Siemens Brothers and Company Limited England 1862". I guess it must be a good 100+ y.o. Made completely of brass you can see, from age, that the patina of the brass is red in some places.
The clockwork mechanism still works and the paper tape still feeds. The large solenoids' that would have keyed the system are still OK ( test at 510 ohm.)
What to do with it? A good project to clean up and polish all that brass bits and pieces, or just leave it as is. Any one wager what it could be worth or of any interest?
Attached Thumbnails
Click image for larger version

Name:	DSCN0434.jpg
Views:	262
Size:	106.2 KB
ID:	246765   Click image for larger version

Name:	DSCN0433.jpg
Views:	248
Size:	103.4 KB
ID:	246766   Click image for larger version

Name:	DSCN0432.jpg
Views:	231
Size:	88.7 KB
ID:	246767   Click image for larger version

Name:	DSCN0431.jpg
Views:	214
Size:	78.4 KB
ID:	246768  
Des Miles is offline  
Old 27th Nov 2021, 8:40 pm   #2
Dave Moll
Dekatron
 
Dave Moll's Avatar
 
Join Date: Feb 2005
Location: West Cumbria (CA13), UK
Posts: 6,118
Default Re: Morse inker.

Telegraphy is definitely part of telecommunications - and a very fine piece it looks. My personal preference would be to retain the patina rather than polish it up, but that's up to you as its owner. I would certainly advise leaving as is if you're intending to sell it.

Again, if it were mine I would want to have it working if at all possible. Is it possible to wire it such that signals from the key are looped back to the inker by way of a demonstration.
__________________
Mending is better than Ending (cf Brave New World by Aldous Huxley)
Dave Moll is online now  
Old 28th Nov 2021, 11:52 am   #3
peter_scott
Dekatron
 
peter_scott's Avatar
 
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 3,273
Default Re: Morse inker.

I would mirror everything that Dave suggests.

Peter
peter_scott is offline  
Old 28th Nov 2021, 2:26 pm   #4
Guest
Guest
 
Posts: n/a
Default Re: Morse inker.

Another "if it was mine", a complete restoration to like new and working, I may even include a little box that sends morse and powers it for demonstrations. That may reduce the "value" but it would be a lovely thing to behold. Musea (plural for museum I guess) are full of old tatty stuff, to see a hundred year old bit of kit as it was "back in the day" would be a revelation.

Don't get me wrong, I love musea and have yet to find a Roman skeleton uncleaned.
 
Old 28th Nov 2021, 2:28 pm   #5
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,800
Default Re: Morse inker.

I think it's best staying with you in the part of the world where its history lies.

Otherwise, it's hard to pin a price on it. At a specialist auction the prices could go high if you happen to get two people who want it. But that would separate it from its history.

Do you happen to have any maritime radio stations set up as museums in the area?

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is online now  
Old 28th Nov 2021, 3:01 pm   #6
Des Miles
Triode
 
Join Date: Jan 2006
Location: Port Elizabeth, South Africa
Posts: 15
Default Re: Morse inker.

Do you happen to have any maritime radio stations set up as museums in the area?

David[/QUOTE]

Alas no, any history related to the colonial era is viewed with disdain.
Des Miles is offline  
Old 28th Nov 2021, 3:30 pm   #7
G6Tanuki
Dekatron
 
G6Tanuki's Avatar
 
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 13,953
Default Re: Morse inker.

It's rather lovely! Lasttime I saw something like that it was described as an "Undulator".

I'd get it working, and - as mentioned above - make up something that can send Morse to it as a demonstration [I'd suggest one of the cheap electronic 'voice recorder' things available for a few pounds, used to record tones, then on playback a diode to convert the tones to DC which then drives a switching transistor to drive the coil].
__________________
I'm the Operator of my Pocket Calculator. -Kraftwerk.
G6Tanuki is offline  
Old 28th Nov 2021, 4:52 pm   #8
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,800
Default Re: Morse inker.

Inkers draw dots and dashers. Undulators keep a pen in contact and deflect it to the side with the signal producing undulations of signal dependent amplitude. They're reckoned to be better suited to subtle interpretation than all-or-nothing inkers.

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is online now  
Old 29th Nov 2021, 9:29 am   #9
greenstar
Octode
 
greenstar's Avatar
 
Join Date: Jul 2011
Location: Leicester, Leics. UK.
Posts: 1,681
Default Re: Morse inker.

As with a lot of things I find telegraphy fascinating. Your sounder is delightful, I would just try to get it working with a light clean. I believe inkers were often used with sounders, as the coils on the inker didn't always make a loud enough sound, perhaps in an office with several lines. I made a sounder from an article in one of the boy mechanic type books, and it makes a fantastic clunking sound. They were used with a hood to direct the sound.
You can of course find other telegraph items, but they tend to be pricey.
Tony
Attached Thumbnails
Click image for larger version

Name:	P1010381.jpg
Views:	97
Size:	38.9 KB
ID:	246891   Click image for larger version

Name:	P1010380.jpg
Views:	94
Size:	84.2 KB
ID:	246892  
greenstar is offline  
Old 29th Nov 2021, 9:56 am   #10
John M0GLN
Octode
 
John M0GLN's Avatar
 
Join Date: Jan 2004
Location: Southport, Merseyside, UK.
Posts: 1,156
Default Re: Morse inker.

Quote:
Originally Posted by Des Miles View Post
Made completely of brass you can see, from age, that the patina of the brass is red in some places.
Lovely bit of equipment, the red patina could be a sign of dezincification, perhaps some dampness over the years has caused zinc to leach out of the brass and leave copper showing red, of no importance in this case.

John
John M0GLN is offline  
Old 30th Nov 2021, 12:52 pm   #11
M0AFJ, Tim
Hexode
 
M0AFJ, Tim's Avatar
 
Join Date: Mar 2006
Location: Helston, Cornwall, UK.
Posts: 301
Default Re: Morse inker.

We have a working Inker at the Marconi Wireless Museum at Bass Point on the Lizard, worth a quick visit if you’re doing the Cornwall coastal path
M0AFJ, Tim is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 10:47 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.