UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video

Notices

Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Closed Thread
 
Thread Tools
Old 19th Feb 2007, 8:26 pm   #1
earlytv
Retired Dormant Member
 
earlytv's Avatar
 
Join Date: Apr 2005
Location: Racine Wisconsin USA
Posts: 14
Default GEC 4081A CRT Pinout?

Can anyone post pin out and data on a gec 4081?

Thanks
earlytv is offline  
Old 3rd Mar 2007, 8:12 am   #2
dazzlevision
Dekatron
 
Join Date: Sep 2003
Location: Near Swindon, North Wiltshire, UK.
Posts: 3,595
Default Re: GEC 4081A CRT Pinout?

Hi,

GEC valve manual, part 1, Aug 1957, edition 2 states:

4081 and 4081A use a B9 base, with the following pinout:

1 = X1
2 = Y1
3 = A2
4 = H, K
5 = H
6 = G
7 = A1,3
8 = Y2
9 = X2

The indexing pip is between pins 4 & 5.

Looks like an oscilloscope tube, with a screen diameter of 2.75", green phosphor, 4V @ 0.8V heater, 80 - 200V A1 volts, 400 - 800 A3 volts, -30V max G1 cut-off (max), deflection sensitivity (mm/V) X = 150/VA2; Y = 150/VA2.

Hope this helps.

Regards,

Dazzlevision
dazzlevision is online now  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 10:46 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.