UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Computers

Notices

Vintage Computers Any vintage computer systems, calculators, video games etc., but with an emphasis on 1980s and earlier equipment.

Closed Thread
 
Thread Tools
Old 29th Nov 2022, 12:15 am   #1
Phil__G
Octode
 
Join Date: Mar 2011
Location: North Yorkshire, UK.
Posts: 1,087
Default PIC14 edit, added save after hexload

It seemed strange to me that only manually keyed in programs were kept non-volatile. If you hex-loaded a program, it disappeared with the power off.
If you wanted to take your PIC14 to a show with a pre-loaded demo, say "Duckshoot", you couldnt hex-load the demo at home - you'd have to key it in manually, or hexload it at the show!
I dont think Karen did this deliberately, I think the intel hex loader was probably a 'late addition' to the firmware. Anyway this edit saves the hex-loaded program.
Its on the "Karen Orton 'PICL' NIBL Computer & PIC14 files" page of http://philg.uk right at the bottom of the page.
Phil__G is online now  
Old 29th Nov 2022, 2:49 am   #2
Phil__G
Octode
 
Join Date: Mar 2011
Location: North Yorkshire, UK.
Posts: 1,087
Default Re: PIC14 edit, added save after hexload

Forgot to say, when a new PIC is programmed for the very first time, ie nothing has yet been manually keyed in or hex-loaded, rather
than leaving it empty, the non-volatile ram defaults to the Science of Cambridge Message demo from the MK14 manual.
This is overwritten as soon as any new program is keyed in or hexloaded.
So you can blow a brand-new pic, plug it in, press the "SC/MP Reset" button, type F 2 0 and Go, which if nothing else is a quick test,
confirming that indeed "as you can see the S of C is a jolly fine buy"
Cheers
Phil

Last edited by Phil__G; 29th Nov 2022 at 2:55 am.
Phil__G is online now  
Old 22nd Feb 2023, 6:55 pm   #3
Realtime
Hexode
 
Join Date: Jan 2021
Location: Ashford, Kent, UK
Posts: 318
Default Re: PIC14 edit, added save after hexload

I just posted a quick 2 minute video of the building of my PIC14 module. Very nice project and worked first time. It was great having the demo program already installed.

Next thing to try is the hex loader
Realtime is offline  
Old 22nd Feb 2023, 10:17 pm   #4
Timbucus
Octode
 
Join Date: Mar 2019
Location: Barry, Vale of Glamorgan, Wales, UK.
Posts: 1,362
Default Re: PIC14 edit, added save after hexload

Yea nice liked the time lapse of the components being added
Timbucus is online now  
Old 22nd Feb 2023, 11:24 pm   #5
Phil__G
Octode
 
Join Date: Mar 2011
Location: North Yorkshire, UK.
Posts: 1,087
Default Re: PIC14 edit, added save after hexload

Yes that was very effective!
Phil__G is online now  
Old 25th Feb 2023, 6:10 pm   #6
Realtime
Hexode
 
Join Date: Jan 2021
Location: Ashford, Kent, UK
Posts: 318
Default Re: PIC14 edit, added save after hexload

Quote:
Originally Posted by Realtime View Post
Next thing to try is the hex loader
So the hex loader is working. I assume PIC14 doesn't recognise the execution address tagged at the end of the hex file? Currently PIC14 boots back to 0000 00 after a load.

I was trying to load a hex file that spanned the 0xB00 and 0xF00 RAM areas, only to eventually find this statement on Karen's site "although the PIC14 RAM features several times in the memory map, they are just copies – there is only 256 bytes of RAM in total". Explains why when I loaded Moon Lander ('George' version of course) I found it mirrored in the 0xB00 area. I must learn to read the documentation first
Realtime is offline  
Old 25th Feb 2023, 7:12 pm   #7
SiriusHardware
Dekatron
 
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 11,485
Default Re: PIC14 edit, added save after hexload

Quote:
I assume PIC14 doesn't recognise the execution address tagged at the end of the hex file?
No, that 'convention' of having the execution address stored at FFFE/FFFF in the file only came about with my Pi-uploader, which Karen's PIC14 pre-dated by some years.

Phil seems to enjoy tweaking the PIC14 code though, so....?
SiriusHardware is offline  
Old 21st Mar 2023, 8:05 pm   #8
Realtime
Hexode
 
Join Date: Jan 2021
Location: Ashford, Kent, UK
Posts: 318
Default Re: PIC14 edit, added save after hexload

Some photos of my PIC14 fully dressed. It's actually a red LED display but the camera can't handle it.

To have a single letter for every key I used
P: PIC reset
R: MK14 reset
X: Abort

Attached is the hex file for displaying PIC14 on the 7 segment if anyone wants it. Loads and runs from 0F20.

It waits for a key press before returning to the monitor but only keys 2, 6, 8, C, F are detected as valid. The others are ignored. PIC14 keyboard decoding strikes again
Attached Thumbnails
Click image for larger version

Name:	PIC14 Cased 1.jpg
Views:	42
Size:	105.2 KB
ID:	275501   Click image for larger version

Name:	PIC14 Cased 2.jpg
Views:	40
Size:	107.7 KB
ID:	275502   Click image for larger version

Name:	PIC14 Cased 3.jpg
Views:	41
Size:	148.3 KB
ID:	275503  
Attached Files
File Type: zip pic14 7 segment.zip (936 Bytes, 19 views)
Realtime is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 12:28 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.