UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video

Notices

Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Reply
 
Thread Tools
Old 18th Oct 2020, 5:05 pm   #141
peter_scott
Nonode
 
peter_scott's Avatar
 
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 2,491
Default Re: My first foray into Old model TV repairs. Ferguson 991T.

OK, I didn't recon on the metal adjusters. I wonder if you pushed the can clip off whether you could pull the whole can, adjuster and core off the top of the coil former?

Peter
peter_scott is offline   Reply With Quote
Old 18th Oct 2020, 5:23 pm   #142
AdrianH
Hexode
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 429
Default Re: My first foray into Old model TV repairs. Ferguson 991T.

I needed to get to the two caps in the line sync discriminator can, to do that, I had to unsolder the connections to the can, undo the two screws underneath to remove it. Bend out tabs, then I had to squeeze in tabs on the top of the adjuster metal to allow the can to be withdrawn. I never removed the metal clip but assume looking at the small divots in it, it has sections formed into the tube to hold it in place.

Think it would be easiest to remove the can from chassis first otherwise I am trying to work around components and the tube. But for now it is working,. I offered up the back panel now it is flat and thin found it has shrunk! The holes for the screws do not line up with the holes in the cabinet, not by a lot out so will see what I can do for that soon.

Adrian
__________________
Ask questions and learn, or try to!
AdrianH is online now   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 5:06 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.