|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
28th Jun 2021, 2:10 am | #1 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Toshiba DV-90T Pinch roller
Hi at all,
anyone know the measurement of the pinch roller for the Toshiba DV-90T? Sadly i'm not able to measure the old one i don't have the vernier caliper. Thanks at all, Libratron m(_ _)m |
28th Jun 2021, 4:31 am | #2 |
Octode
Join Date: Jul 2006
Location: Perth, Western Australia
Posts: 1,965
|
Re: Toshiba DV-90T Pinch roller
An inexpensive caliper may be enough to at least measure the diameter and length. Even a good steel rule. The shaft hole diameter can be gauged with a metric drill bit. It's usually either 3 or 4 mm.
|
28th Jun 2021, 9:56 am | #3 |
Dekatron
Join Date: Apr 2005
Location: North Wales, UK.
Posts: 6,884
|
Re: Toshiba DV-90T Pinch roller
Although this isn't a model that was distributed in the UK, bear in mind many more recent Toshibas were made by Funai. A photo of the deck would mean we could identify it and maybe measure one for you.
|
28th Jun 2021, 4:31 pm | #4 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Re: Toshiba DV-90T Pinch roller
Thanks at all.
I have find the original measurement in the net; https://www.audio-video-versand.de/A...lle-AR-12.html Thanks at all. Libratron |