|
Sets and Parts Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps. |
|
Thread Tools |
7th Aug 2023, 10:06 am | #1 |
Dekatron
Join Date: Jun 2015
Location: Biggin Hill, London, UK.
Posts: 5,227
|
Philips PCB connector
The attached photo shows a connector in a Philips viewdata set. I think it was used in other Philips devices in the early 1980s too, perhaps the KT3 television chassis.
The wire-mounted socket housing has sloping ends for polarisation, there's also a groove for this in the housing. The pins/holes are round, not square. Does anyone know where I can get such connectors? I am probably going to need (at least) a 6 pin wire-mounted socket. |
7th Aug 2023, 11:12 am | #2 |
Dekatron
Join Date: Sep 2003
Location: Near Swindon, North Wiltshire, UK.
Posts: 3,626
|
Re: Philips PCB connector
Yes, both Philips (KT4 and K40 chassis) and Pye (713/731/725 chassis) used them.
I think some were branded “Stocko”. https://www.stocko-contact.com/en/pr...m-mkh-2800.php |
28th Aug 2023, 1:51 pm | #3 |
Pentode
Join Date: Jan 2009
Location: Birmingham, West Midlands, UK.
Posts: 234
|
Re: Philips PCB connector
Hi Tony,
Hopefully I have attached 2 photos of Philips panels and connectors, are you still looking for some Shikoku plugs and sockets? No Charge! Just pay for the postage! Regards, Phil Blundell |