UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Television Standards Converters, Modulators etc

Notices

Television Standards Converters, Modulators etc Standards converters, modulators anything else for providing signals to vintage televisions.

Closed Thread
 
Thread Tools
Old 29th Oct 2021, 11:22 am   #1
Richardgr
Hexode
 
Join Date: Oct 2019
Location: Täby, Sweden
Posts: 263
Default 2.5kV power supply

This is available on a local site, and I'm sure postage would be possible to the UK. I've never seen one before - a 2.5kV power supply. Is that cat nip to a TV restorer?

2.5kV power supply
Attached Thumbnails
Click image for larger version

Name:	Screenshot 2021-10-29 131940.jpg
Views:	239
Size:	65.8 KB
ID:	244525  
Richardgr is offline  
Old 29th Oct 2021, 11:45 am   #2
GrimJosef
Dekatron
 
Join Date: Sep 2007
Location: Oxfordshire, UK.
Posts: 3,921
Default Re: 2.5kv power supply

We used to use similar things at work for powering vacuum photodiodes. Our supplies weren't capable of delivering much current, but the dark current in the diodes was generally very small.

Cheers,

GJ
__________________
http://www.ampregen.com
GrimJosef is offline  
Old 29th Oct 2021, 3:54 pm   #3
Guest
Guest
 
Posts: n/a
Default Re: 2.5kV power supply

Is that 2.5 or 25 kV?
 
Old 29th Oct 2021, 5:05 pm   #4
Uncle Bulgaria
Octode
 
Join Date: May 2016
Location: Cornwall, UK.
Posts: 1,521
Default Re: 2.5kV power supply

It looks European to me with a comma separator - doesn't that say "A2,5k" bottom right?
Uncle Bulgaria is offline  
Old 29th Oct 2021, 7:00 pm   #5
Ed_Dinning
Dekatron
 
Join Date: Jan 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 7,348
Default Re: 2.5kV power supply

Hi Folks, should be OK for the VCR97 type of set but too low for a TV22.
On the up side I suspect it has low current so will not kill you (but nasty bite) the way a mains derived type would

Ed
Ed_Dinning is offline  
Closed Thread

Thread Tools



All times are GMT. The time now is 5:03 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.