|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
29th Nov 2022, 12:47 am | #1 |
Moderator
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,224
|
Glue for speaker cloth
I'm restoring a Philips radiogram and need to replace the speaker cloth.
i have some suitable material, but am wondering which type of glue to use. In the past, I've used Evo-Stik, impact adhesive after stapling the cloth to the wood. I'm wondering though if there is a better glue and a better method. |
29th Nov 2022, 1:26 am | #2 |
Banned
Join Date: Jun 2015
Location: Mareeba, North Queensland, Australia
Posts: 2,704
|
Re: Glue for speaker cloth
If its "proper " speaker cloth, it should shrink with applied heat from a hairdryer or heatgun.
Otherwise my method has been to stretch it evenly over the baffle and staple it generously all around. A paper stapler wont do. I have several different industrial staplers, including an air driven apholstery "tacker " . Staples are available in a thousand formats these days, and dont be afraid of the Chinese stainless steel staples. So far my experience with them has been excellent. Joe If I had to glue it on, I would be using water based acrylic contact glue. Last edited by joebog1; 29th Nov 2022 at 1:27 am. Reason: additional thoughts |
29th Nov 2022, 2:14 am | #3 |
Pentode
Join Date: Sep 2021
Location: Aabenraa, South Jutland, Denmark.
Posts: 224
|
Re: Glue for speaker cloth
I always used staples and wood glue. And that goes for all the different types of cloth I have been using.
Regards, Jan |
29th Nov 2022, 10:07 am | #4 |
Octode
Join Date: Sep 2020
Location: Thetford, Norfolk, UK.
Posts: 1,741
|
Re: Glue for speaker cloth
I have tried various glues in the past, but my go-to one now is 'Mod Podge'. This is a multi-purpose craft glue and I find it easier to use, and it doesn't tend to leak through the cloth. Available online of course but also from places like Hobbycraft and The Works.
|
29th Nov 2022, 10:28 am | #5 |
Dekatron
Join Date: Jun 2009
Location: Staffordshire Moorlands, UK.
Posts: 5,271
|
Re: Glue for speaker cloth
if it's a simple grille/board behind then I spray it with carpet aerosol glue, adding the cloth from the top and gently stretching it over and then on so the weave is level. If the grille is a sort of fret then in the past I have taken evostick (from a can) and thinned it down with a xylene or toluene-type solvent, then brushed it on sparingly with an old paint brush, then added the cloth that way once it's gone tacky.
I haven't used PVA wood glue but I know people who swear by it.
__________________
Kevin |
29th Nov 2022, 2:13 pm | #6 |
Pentode
Join Date: Aug 2014
Location: Leeds, West Yorkshire, UK.
Posts: 132
|
Re: Glue for speaker cloth
Pre-WW2 they used the same glue as the wood - hot hide glue.
I use Titebond hide glue around, but well clear of, the speaker grille aperture; the glue allows you to re-tension after application as it allows slip, taking a day or so to set properly. It may however bleed through, particularly on light coloured materials (hence applied well away from visible areas). It is a reversible adhesive and can be released with heat or hot water. Of course, sub-baffle boards are easiest as you can pre-tension the fabric on an external frame and 'drop' the baffle in, or drop the frame onto the baffle, thus ensuring the patterning is correctly orientated.
__________________
John Progress consists of doing what you've always done - just more expensively. |
10th Dec 2022, 11:25 am | #7 |
Tetrode
Join Date: Oct 2013
Location: Alconbury, Cambridgeshire, UK.
Posts: 87
|
Re: Glue for speaker cloth
One other tip (I have used) is before fitting the cloth apply some Ironing spray (Available at most big stores) then iron before fitting, this helps flatten the cloth and make it a lot easier to fit, it also stops you having to stretch the material, Cheers Ian G
|