|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
11th Nov 2015, 4:35 pm | #1 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
JVC VCM-II Back Tension Cassette
Hi at all,
i have find this alignment tape, for parts, but i don't know the right tape travel for this cassette. Anyone have this cassette, or explain me the correct travel of this alignment tape? In the last photo, i have attached the cassette spring, in this alignment tape is missing. Let me know Libra |
11th Nov 2015, 4:37 pm | #2 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Re: JVC VCM-II Back Tension Cassette
The attached spring.
|
11th Nov 2015, 5:37 pm | #3 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: JVC VCM-II Back Tension Cassette
I spotted an error here. The tape should travel between those two rollers.
|
11th Nov 2015, 6:08 pm | #4 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Re: JVC VCM-II Back Tension Cassette
OK and a another guide error?
Thanks, Libra |
11th Nov 2015, 8:44 pm | #5 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: JVC VCM-II Back Tension Cassette
Everything else looks ok.
Fivos |
11th Nov 2015, 9:27 pm | #6 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Re: JVC VCM-II Back Tension Cassette
Seriously?
Are all ok? Libra |
11th Nov 2015, 9:41 pm | #7 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: JVC VCM-II Back Tension Cassette
The tape path is OK. I'm not sure if this tape originaly had a spring.
|
11th Nov 2015, 11:11 pm | #8 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Re: JVC VCM-II Back Tension Cassette
i have attached the spring, for the reels position.
This without spring, is go up and down into the cassette. Libra |
12th Nov 2015, 2:29 am | #9 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Re: JVC VCM-II Back Tension Cassette
i have insert a cassette on a working vhs vtr, press play, but no back tension reading.
Where is wrong? :-( Libra |
12th Nov 2015, 5:14 pm | #10 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: JVC VCM-II Back Tension Cassette
Remove the spring that you installed! This is preventing the meter unit from moving back and forth and that's why you don't see any measurements.
|
12th Nov 2015, 6:40 pm | #11 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Re: JVC VCM-II Back Tension Cassette
I have try without the spring, But again, i not have a back tension reading ;-(
Libra |