|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
5th Nov 2015, 3:22 pm | #1 |
Retired Dormant Member
Join Date: Nov 2015
Location: Waynesboro, Georgia, USA.
Posts: 1
|
UVW-1400 Beta SP deck - tracking adjustment question
I have a UVW-1400 Beta SP deck I'm using to digitize some of my older news tapes. Had a bit of a tracking issue seen here: https://forums.creativecow.net/readpost/21/864921
There's a switch on the SS-61 board for adjusting (SS-53 on the UVW-1800) that allows adjustments of tracking. The service manual says to push reset (NO) button the after after adjusting tracking and the video tracking is reset to the tracking center position. Seems to reset though after powering down. Any clues on locking in the adjustment I made? I was able to completely clean up the image through a minor adjustment. Would like to lock in that adjustment. Not a lot of areas to find people familiar with these, It's very similar to the UVW-1800. Last edited by AC/HL; 5th Nov 2015 at 3:42 pm. Reason: Link corrected |