|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
6th Dec 2021, 11:25 am | #1 |
Pentode
Join Date: Jun 2008
Location: Christchurch, Dorset, UK.
Posts: 237
|
Majestic Low Boy Update
You may recall that I was trying to restore a 1931 Majestic which had many faulty wound components - sadly I finally gave up having spent much time (and money) trying various solutions, none of which worked satisfactorily. I regret that I gave in, but needs must and I scrapped the chassis and sold off those good parts I had to defray costs. In the end I recouped about 50% of my initial outlay. I could not justify dumping the cabinet - a fine example of 1930's American low boys so I committed another sin and turned it into a Bluetooth speaker with FM radio, auxilliary & USB inputs.
This was accomplished using a cheap BT/FM module, modified to fit into a slightly enlarged dial "window", along with a tone controlled preamp and a 5W amplifier. I'm pleased to say this works fine and gives the cabinet a new life. Sorry if my actions upset some members, but sometimes one just has to give up on a proper restoration. |
6th Dec 2021, 12:27 pm | #2 |
Dekatron
Join Date: Sep 2015
Location: Southwold, Suffolk, UK.
Posts: 8,338
|
Re: Majestic Low Boy Update
I think you've apologised quite enough. So given what you have now, what kind of speaker did you fit - there looks to be room for an 8" or 10" driver?
__________________
Edward. |
6th Dec 2021, 2:53 pm | #3 |
Dekatron
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,864
|
Re: Majestic Low Boy Update
Hi Colin,
A nice usable thing, and you've no doubt done the modern electronics well. Did you retain the original LS or was it not a PM one? Presumably, the dual mains transformers are to prevent digital hash getting into the AF amplifier section? I think if it were mine, I'd have kept the original chassis in situ for historic reasons, and fitted the "modern" chassis elsewhere in the roomy cabinet, and done it in a reversible way, but I appreciate you wanted to recoup some of your costs. N. |
6th Dec 2021, 3:05 pm | #4 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,970
|
Re: Majestic Low Boy Update
Much better than chucking it in a skip, and at least you've made a nice job of it.
|
6th Dec 2021, 3:51 pm | #5 |
Pentode
Join Date: Jun 2008
Location: Christchurch, Dorset, UK.
Posts: 237
|
Re: Majestic Low Boy Update
The original speaker was energised so not used. I economised yet again, and used 4 small speakers I had lying around in a series/parallel arrangement to get back to 4 ohms overal. They are on a custom baffle board.
The 2 transformers were necessary because the preamplifier required positive & negative supplies whilst the power amp did not and they were different voltages. To avoid noise issues I used a B0505S isolated PSU to feed the Bluetooth unit. |
6th Dec 2021, 4:46 pm | #6 |
Dekatron
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,864
|
Re: Majestic Low Boy Update
BTW, what do people think about fixing mains transformers directly to a wooden (or similar) base?
It was certainly common practice in many 1970s/1980s music systems, and presumably your transformers have integral thermal fuses, but might it be a theoretical fire hazard? I'm not trying to suggest that you've done anything that's not entirely sensible and safe, but merely asking the question because it's something I've sometimes done myself... and then worried about! As for the multiple small speakers, how do they sound? If ever something else turned up, it would be fairly trivial to cut another baffle board and fit that. I've had good results with 8" units rescued from middle-of-the-road music centre speakers (the kind of thing that you're left with after improving an old system with proper hifi speakers). |
6th Dec 2021, 5:33 pm | #7 | |
Guest
Posts: n/a
|
Re: Majestic Low Boy Update
Quote:
|
|
6th Dec 2021, 5:45 pm | #8 |
Guest
Posts: n/a
|
Re: Majestic Low Boy Update
Silly idea (I do a lot of those) I may have done an LCD replicating a tuning dial (the small window type) controlled from encoders and driving a DAB/FM receiver all from an Arduino. DAB/FM add ons with all the libraries for the software are available. I would love making it, trying it and then listening to radio on my Hacker.
Some people spend a few hundred quid doing nothing for a week (package holiday), I spend a bit and do loads for a week, much more fun. Last edited by Guest; 6th Dec 2021 at 5:46 pm. Reason: sense! |