|
Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment. |
|
Thread Tools |
2nd May 2022, 5:59 pm | #1 |
Diode
Join Date: May 2022
Location: Derby, Derbyshire, UK.
Posts: 4
|
HMV radiogram model 2354 record speed selector not working
Hi
Hoping someone can assist with this problem HMV radiogram model 2354 The record speed selector no longer functions It can be moved up and down but it's loose and doesn't seem connected to anything Can someone please advise how to repair this please Any help appreciated Thanks |
2nd May 2022, 6:30 pm | #2 |
Dekatron
Join Date: Sep 2015
Location: Southwold, Suffolk, UK.
Posts: 8,338
|
Re: HMV radiogram model 2354 record speed selector not working
Your Radiogram shuld be fitted with a Garrard 2025TC autochanger. If that's correct, the service sheet for this can be found via the top RHS "Service Data" link above.
__________________
Edward. |
3rd May 2022, 9:09 am | #3 |
Diode
Join Date: May 2022
Location: Derby, Derbyshire, UK.
Posts: 4
|
Re: HMV radiogram model 2354 record speed selector not working
Thanks for the prompt reply. I will have a look.
|
4th May 2022, 4:43 pm | #4 |
Diode
Join Date: May 2022
Location: Derby, Derbyshire, UK.
Posts: 4
|
Re: HMV radiogram model 2354 record speed selector not working
It seems that the record player deck that is fitted is in fact the Garrard 6 200 c
I have had a look at the manuals, I just cannot work out how to get the record player unit out of the Radiogram body itself! There are screws around the edge but the unit does not lift out? Again any assistance appreciated. |
5th May 2022, 7:13 am | #5 |
Dekatron
Join Date: Sep 2015
Location: Southwold, Suffolk, UK.
Posts: 8,338
|
Re: HMV radiogram model 2354 record speed selector not working
You will need to turn the retaining clips fixed to the transit screws to the vertical position and just lift the deck out. To do this you will need to access the underside of the deck plate.
__________________
Edward. |
5th May 2022, 7:17 am | #6 |
Moderator
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,225
|
Re: HMV radiogram model 2354 record speed selector not working
Remove the rear cover, you should be able to slide your fingers in, and turn the clamps vertical, then lift the deck out.
|
5th May 2022, 8:56 am | #7 |
Diode
Join Date: May 2022
Location: Derby, Derbyshire, UK.
Posts: 4
|
Re: HMV radiogram model 2354 record speed selector not working
|