|
|
|
|
|||||||
| Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
 |
|
|
Thread Tools |
26th Mar 2024, 6:52 pm
|
#1 |
|
Pentode
Join Date: Jul 2014
Location: Northamptonshire, UK.
Posts: 135
|
Bush dac 10 resistor query
Just bought a dac 10 that's not working, no sound or illumination,the RF filter was totally blown and I've replaced that.
However r21 dial lamp shunt resistor is ,on my set a75ohm resistor,trader sheet says it should be a 250 ohm ,is this correct The 75 ohm looks totally original
__________________
If it ain't bust don't fix it 
|
|
|
|
26th Mar 2024, 9:02 pm
|
#2 |
|
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,289
|
Re: Bush dac 10 resistor query
This comes up regularly where Bush radios (DAC90A included) are concerned. The value of the resistor was changed at some time during the products' life cycle.
If the resistor measures OK leave it alone.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
|
|
|
26th Mar 2024, 9:04 pm
|
#3 |
|
Octode
Join Date: Oct 2019
Location: Stockport, Greater Manchester, UK.
Posts: 1,646
|
Re: Bush dac 10 resistor query
|
|
|
|
|
26th Mar 2024, 9:05 pm
|
#4 |
|
Pentode
Join Date: Jul 2014
Location: Northamptonshire, UK.
Posts: 135
|
Re: Bush dac 10 resistor query
Thanks,it reads about 79 ohm so it well within tolerance,I thought it may have been changed at sometime in the past
__________________
If it ain't bust don't fix it
|
|
|
|
