Power connector Marantz CDR 1 - UK Vintage Radio Repair and Restoration Discussion Forum

rafalow · 25th Mar 2023, 8:02 am

In an older thread I asked for help finding a replacement for the
Power connector Marantz CDR 1.
I am still searching to find a good deal.
recently I found this version of the schaffner power connector.

schaffner fn379b-2-31

I need the schaffner fn379b-2-22 , the 22 refer to the fuses i think.
But I can not find any info about the schaffner fn379b-2-31 version.

In the datasheet is no info about the 31 version.
Is there anyone that has some info ??.

kind regards

rafalow

ronbryan · 25th Mar 2023, 11:15 am

Have you tried contacting Schaffner at https://www.schaffner.com/contact to ask them to explain what a -31 fuse holder is. My understanding of these filters is that the fuse carriers are interchangeable between 1.25" and 20mm, but Schaffner should be able to advise about the -31.

Ron

rafalow · 25th Mar 2023, 12:51 pm

Thank you,

I will contact schaffner.

Kind regards

G6fylneil · 25th Mar 2023, 1:06 pm

Looking at the picture of the voltage selector I think that may be a 115/230 version of the voltage selector. But you can use the voltage selector "drum" out of the old one. They are just "coded" and marked differently. The filter is common to both. Hopefully Schaffner can advise. I think they will soon become obsolete, nothing has mains transformers these days.

rafalow · 25th Mar 2023, 3:20 pm

Thank you,.
I also thought it has something to do with the selector.
now I am searching for a link to ask the queation to schaffner.
even that is a struggle, can not find a direct email link with technical questions.
only forum support.
kind regards.

25th Mar 2023, 8:02 am	#1
rafalow Triode Join Date: Jul 2016 Location: Hoofddorp, Netherlands Posts: 19	Power connector Marantz CDR 1 In an older thread I asked for help finding a replacement for the Power connector Marantz CDR 1. I am still searching to find a good deal. recently I found this version of the schaffner power connector. schaffner fn379b-2-31 I need the schaffner fn379b-2-22 , the 22 refer to the fuses i think. But I can not find any info about the schaffner fn379b-2-31 version. In the datasheet is no info about the 31 version. Is there anyone that has some info ??. kind regards rafalow Attached Thumbnails

25th Mar 2023, 11:15 am	#2
ronbryan Octode Join Date: Jan 2003 Location: Guildford, Surrey, UK. Posts: 1,960	Re: Power connector Marantz CDR 1 Have you tried contacting Schaffner at https://www.schaffner.com/contact to ask them to explain what a -31 fuse holder is. My understanding of these filters is that the fuse carriers are interchangeable between 1.25" and 20mm, but Schaffner should be able to advise about the -31. Ron

25th Mar 2023, 12:51 pm	#3
rafalow Triode Join Date: Jul 2016 Location: Hoofddorp, Netherlands Posts: 19	Re: Power connector Marantz CDR 1 Thank you, I will contact schaffner. Kind regards

25th Mar 2023, 1:06 pm	#4
G6fylneil Pentode Join Date: Sep 2011 Location: Coventry, West Midlands, UK. Posts: 210	Re: Power connector Marantz CDR 1 Looking at the picture of the voltage selector I think that may be a 115/230 version of the voltage selector. But you can use the voltage selector "drum" out of the old one. They are just "coded" and marked differently. The filter is common to both. Hopefully Schaffner can advise. I think they will soon become obsolete, nothing has mains transformers these days.

25th Mar 2023, 3:20 pm	#5
rafalow Triode Join Date: Jul 2016 Location: Hoofddorp, Netherlands Posts: 19	Re: Power connector Marantz CDR 1 Thank you,. I also thought it has something to do with the selector. now I am searching for a link to ask the queation to schaffner. even that is a struggle, can not find a direct email link with technical questions. only forum support. kind regards.