UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Components and Circuits

Notices

Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets.

Closed Thread
 
Thread Tools
Old 18th Aug 2022, 10:30 am   #1
JubalHarshaw
Diode
 
Join Date: Feb 2022
Location: Shepton Mallet, Somerset, UK.
Posts: 1
Default Quad II output transformer

While looking at http://www.keith-snook.info/quad-ii-...amplifier.html it seems that the description of the output transformer is not quite accurate.
The quote 'and all other odd numbered sections forming the primary' must be wrong L14 should surely be L13 in the diagram?
And 'The outside of L14 is wound with a few layers of 0.16mm paper to finish' doesnt help either!
But this brings me on to another point, are there any pictures showing the actual wound construction of the transformer available anywhere?
JubalHarshaw is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 3:36 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.