UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Repair and Restoration Services Wanted

Notices

Repair and Restoration Services Wanted If you need someone to repair or restore equipment for you please post your request here.

Reply
 
Thread Tools
Old 22nd Jul 2020, 2:54 pm   #1
Martin Bush
Octode
 
Martin Bush's Avatar
 
Join Date: Jan 2015
Location: Oxfordshire, UK.
Posts: 1,278
Default CD labelling help

I am not sure if this is in the right area - please move or delete if not.

I wondered if anyone on here has the ability to label CDs. I don't have a printer and want to make up one or possibly two CDs of home recordings for my dad. Rather than scribble on the disc itself I'd like to do a nice job and wondered if anyone on here could help?

I'd post off the CDs and cover costs of course.
__________________
Martin

"Clip, clop, cloppity cloppity cloppity cloppity high..."
Martin Bush is offline   Reply With Quote
Old 22nd Jul 2020, 4:59 pm   #2
Paul Stenning
Administrator
 
Paul Stenning's Avatar
 
Join Date: Dec 2002
Location: Cardiff
Posts: 7,742
Default Re: CD labeling help

If they are smooth I can print them with my TDK thermal printer. It is limited to one or two small areas, not the whole surface. I cannot print on inkjet printable disks.

See https://www.service-data.com/product...-rom-disc-only which is one area. Second or alternative area would be the same place at the top. Black text only, and four lines like that per area is all you can fit in. In theory basic graphics can be included but they don't look good, so stick with text.

The instructions say the disks should be blank when printed. This is probably in case the heat from the printing affects the recording. I always print blank then write and verify afterwards. I have never had any problems with the printing affecting the disks but there is no guarantees.

The printer ribbons are quite expensive (about 12, which does 40 areas) so you are looking at 30p per print area, plus return postage.

If interested please PM me.
__________________

Paul Stenning
Forum Admin/Owner and BVWS Committee Member

Last edited by Paul Stenning; 22nd Jul 2020 at 5:03 pm. Reason: Added cost
Paul Stenning is offline   Reply With Quote
Old 22nd Jul 2020, 5:03 pm   #3
Amraduk
Hexode
 
Join Date: Jan 2007
Location: Welwyn Garden City, Hertfordshire, UK.
Posts: 454
Default Re: CD labeling help

Hello Martin,

Do you want the label to printed on a label that's stuck on to the CD, or printed directly on to the CD?

Either way, I could do that for you if you like.

What about artwork for the jewel case?

Regards,

Dave.
Amraduk is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 7:06 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.