|
|
|
|
|||||||
| Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
 |
|
|
Thread Tools |
12th Jun 2021, 11:21 am
|
#1 |
|
Heptode
Join Date: Jun 2018
Location: Carmarthenshire, Wales, UK.
Posts: 569
|
PYE P43 Capacitor
Hi can any please help I need to replace C19 AFCouling capacitor which is a 0.005uf what modern type should I get. What uf and voltage please. If any one could help
|
|
|
12th Jun 2021, 12:08 pm
|
#2 |
|
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,289
|
Re: PYE P43 Capacitor
0.0047uF or 4.7nF. 250VDC or higher will be OK.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
|
|
|
12th Jun 2021, 12:21 pm
|
#3 |
|
Octode
Join Date: Dec 2018
Location: Llandeilo, West Wales, UK.
Posts: 1,092
|
Re: PYE P43 Capacitor
A 0.0047uF polyester axial type is fine. Even though there isn't a lot of voltage on that specific capacitor, get 630 volt ones as they will be more useful in the future.
Cricklewood do them https://www.cricklewoodelectronics.com/CFH4N7H.html Or a pack of 5 off ebay https://www.ebay.co.uk/itm/114837854...oAAOSwYUpeTD7b Change C11 as well. That needs a 0.022uF job the same type as C19.
__________________
Never Leave Well Enough Alone... |
|
|
|
12th Jun 2021, 12:30 pm
|
#4 |
|
Heptode
Join Date: Jun 2018
Location: Carmarthenshire, Wales, UK.
Posts: 569
|
Re: PYE P43 Capacitor
Thank you very much for your help much appreciate
|
|
|
