|
Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE! |
|
Thread Tools |
12th Jan 2022, 9:28 pm | #1 |
Octode
Join Date: Dec 2003
Location: Leeds, West Yorkshire, UK.
Posts: 1,588
|
K.B MR10 drive cord rewind
Whilst trying to put a new drive cord on my K.B MR10 radio, I came unstuck with trying to get 3 turns around the tuning spindle. Then I discovered that there were 2 screws situated on the metal backing scale. Luckily I had a 4BA nut spinner tool that released these nut type screws and this made the job a whole lot easier to rethread the cord.
It sounds a bit obvious, but it is just a tip for anyone who is new to the hobby. |