|
|
|
|
|||||||
| Vintage Tape (Audio), Cassette, Wire and Magnetic Disc Recorders and Players Open-reel tape recorders, cassette recorders, 8-track players etc. |
 |
|
|
Thread Tools |
14th Jan 2023, 11:44 am
|
#1 |
|
Moderator
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 6,987
|
Dynatron HFC38 cassette section
I am restoring this music centre which is fitted with the SRX26 chassis and a modified Philips N2505 cassette recorder.
Someone has cut the Din plug cable that goes from the cassette deck to the main chassis. There is a separate PCB which is not a Philips one that sits in the corner, There are no diagrams for this. Does anyone know where it connects to, or better still does anyone have one that they could photograph for me. |
|
|
|
14th Jan 2023, 3:39 pm
|
#2 |
|
Dekatron
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 5,759
|
Re: Dynatron HFC38 cassette section
Are there no clues in the SRX26 Service Manual ?
David |
|
|
|
|
14th Jan 2023, 11:17 pm
|
#3 |
|
Moderator
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 6,987
|
Re: Dynatron HFC38 cassette section
Unfortunately not
|
|
|
|
|
15th Jan 2023, 10:05 am
|
#4 |
|
Dekatron
Join Date: Feb 2009
Location: Chesterfield, Derbyshire, UK.
Posts: 3,392
|
Re: Dynatron HFC38 cassette section
Hi Michael are you saying that it was hard wired originally, I would have thought there would have been some remnant of the cable if it was cut. Mick.
|
|
|
|
15th Jan 2023, 2:47 pm
|
#5 |
|
Dekatron
Join Date: Sep 2015
Location: Southwold, Suffolk, UK.
Posts: 7,830
|
Re: Dynatron HFC38 cassette section
Might this be some kind of simple attentuator/pre-amp that matches the Philips record/replay electronics to the Dynatron's audio section input?
__________________
Edward. |
|
|
|
|
16th Jan 2023, 2:30 pm
|
#6 |
|
Moderator
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 6,987
|
Re: Dynatron HFC38 cassette section
The panel doesn't appear to have any active components but it does have a slide switch, I'll have to see what actuates it.
The original cable was a short 4 core screened cable, hard wired to the machine and terminating in a 5 pin din plug. |
|
|
|
|
23rd Jan 2023, 4:36 pm
|
#7 |
|
Dekatron
Join Date: Sep 2003
Location: Near Swindon, North Wiltshire, UK.
Posts: 3,331
|
Re: Dynatron HFC38 cassette section
Here are some phone camera shots of the relevant HFC38 service manual relating to the tape interface board and wiring.
Last edited by dazzlevision; 23rd Jan 2023 at 4:42 pm. |
|
|
|
|
24th Jan 2023, 12:02 am
|
#8 |
|
Moderator
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 6,987
|
Re: Dynatron HFC38 cassette section
Thank you Dazzlevision, but for some reason the board on mine has a switch operated in playback. I.m going to look into it a bit further.
|
|
|
|
