|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
22nd Oct 2021, 3:46 pm | #1 |
Triode
Join Date: Oct 2021
Location: Nijmegen, Netherlands.
Posts: 26
|
Ekco SH 25 dial wiring
Hello,
Question about the wiring of the Ekco SH 25. Does anybody have pictures of how the wiring of the sender/ dial and dial knob must be connected. It's a puzzle for me. Thanks Lewis |
22nd Oct 2021, 6:48 pm | #2 |
Moderator
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,867
|
Re: Ekco SH 25 dial wiring
Is the chain missing?
The Dial on an EKCO SH25 (Trees Receiver) is a straight forward chain from the centre of the dial sprocket to the end of the tuning capacitor shaft sprocket. Never known one to be missing or broken but there's always a first I guess! Here is a snip of the chain in situ The service information from whence this snip came is available here: https://www.service-data.com/product...24/2158/s11524 Cheers Mike T
__________________
Invisible airwaves crackle with life or at least they used to Mike T BVWS member. www.cossor.co.uk |
23rd Oct 2021, 9:09 am | #3 |
Triode
Join Date: Oct 2021
Location: Nijmegen, Netherlands.
Posts: 26
|
Re: Ekco SH 25 dial wiring
Thanks for your reaction,
My SH25 doesn't have a chain but a thin thread beginning on the scale and ending on the sender knob on under the radio. See attachment. |
23rd Oct 2021, 10:25 am | #4 |
Moderator
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,867
|
Re: Ekco SH 25 dial wiring
Apologies the information I linked was for the RS3.
I don't have the restringing information for the SH25 to hand and all My EKCO including my SH25 sets are in storage. Hopefully another member can help you. Cheers Mike T
__________________
Invisible airwaves crackle with life or at least they used to Mike T BVWS member. www.cossor.co.uk |
23rd Oct 2021, 10:36 am | #5 |
Nonode
Join Date: Jun 2008
Location: Coningsby, Lincolnshire, UK.
Posts: 2,819
|
Re: Ekco SH 25 dial wiring
Hi,
I've been digging around for information on this for a while, not found much so far! Best I've seen was this website, there are some photo's, but they are quite low resolution, might be worth contacting the owner? From what I can see it's strung using dial cord, round the pointer, then down to the drum on the tuning capacitor, then to the tuning knob, how exactly this is done I don't know! Regards, Lloyd |
24th Oct 2021, 7:42 am | #6 |
Triode
Join Date: Oct 2021
Location: Nijmegen, Netherlands.
Posts: 26
|
Re: Ekco SH 25 dial wiring
Hi Lloyd, thanks for the tips! I go check this owner. Grt Lewis
|