UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Closed Thread
 
Thread Tools
Old 19th Jun 2021, 11:54 pm   #1
AdrianH
Heptode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 808
Default Fixing clips for my Ferguson TV

Does anyone know where I can acquire these type of clips, or if any one has a few going spare, some have finally given out on me.

Click image for larger version

Name:	clips.jpg
Views:	85
Size:	73.4 KB
ID:	236127
You can see how this one has broken, they are 15mm across the back stand about 10mm high and have approx 2mm gap to secure the metal chassis. Take a typical screw to clamp them to the wooden case.

Appreciate if anyone could assist.

Adrian
__________________
Ask questions and learn, or try to!
AdrianH is offline  
Old 20th Jun 2021, 9:39 am   #2
60 oldjohn
Dekatron
 
Join Date: Dec 2004
Location: East Yorkshire, UK.
Posts: 3,009
Default Re: Fixing clips for my Ferguson TV

They still make similar clips for the car industries. Please Google Spire clips. Plenty of suppliers but I would contact the manufacturers, they usually supply in 1000s but may be persuaded to supply a sample assuming they have correct part you are after.

John.
__________________
My favourite text message "I'll be there in five minutes, if not read again"
60 oldjohn is online now  
Old 20th Jun 2021, 10:10 am   #3
AdrianH
Heptode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 808
Default Re: Fixing clips for my Ferguson TV

Thanks John I have placed and order for some spire angled nuts for scrw size No 8 I will see what turns up and if it will fit.

Adrian
__________________
Ask questions and learn, or try to!
AdrianH is offline  
Old 21st Jun 2021, 12:16 pm   #4
AdrianH
Heptode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 808
Default Re: Fixing clips for my Ferguson TV

Just to close this thread, I got 10 clips delivered next day by courier for less than 5.

It was a heating company DHS.

Adrian

Mods please close.
__________________
Ask questions and learn, or try to!
AdrianH is offline  
Closed Thread

Thread Tools



All times are GMT. The time now is 10:44 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.