|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
10th Nov 2009, 12:05 pm | #1 |
Rest in Peace
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 7,306
|
This may be a silly question, but......
......having printed a relacement dial scale onto an acetate, how do I attach it to, or transfer it to, the original glass scale plate of(in this case) a Ferranti U1015? In addition, do I also laminate the acetate sheet to the clear plastic one that came with it?
|
10th Nov 2009, 12:50 pm | #2 |
Octode
Join Date: Nov 2003
Location: Bath, Somerset, UK.
Posts: 1,805
|
Re: This may be a silly question, but......
The best method is to sandwich the acetate sheet in between two pieces of thin glass. Picture glass is generally half the thickness of tuning scale glass, so this is ideal. The sandwich should be sealed around its edges with some thin strips of masking tape. This method prevents the acetate sheet from flexing as well as protecting it from heat from the lamp.
Neil
__________________
preserving the recent past, for the distant future. |
10th Nov 2009, 12:50 pm | #3 |
Heptode
Join Date: Feb 2006
Location: Roscommon, Ireland
Posts: 732
|
Re: This may be a silly question, but......
When making a replacement dial for one which is broken. I usually print onto overhead projector film and attach it onto the dial glass with oil based varnish (water based varnish will destroy the print).
This method is slow drying and messy, but I find it gives good results. After a day or so you will find air bubbles between the film and glass. These can be removed by pushing them towards the edge of the dial and braking the seal at that point. Frank |
10th Nov 2009, 12:54 pm | #4 |
Rest in Peace
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 7,306
|
Re: This may be a silly question, but......
Thanks, Frank. I presume this method will work with acetate, too.
|
11th Nov 2009, 12:53 am | #5 |
Heptode
Join Date: Feb 2006
Location: Roscommon, Ireland
Posts: 732
|
Re: This may be a silly question, but......
I have never tried acetate, but as long as the varnish don't attack it, it should be OK.
I usually lay the glass across the open top of a cardboard box with plenty of newspapers underneath to catch any spills. I generously coat the glass with varnish. Starting at one end I lay the film on top trying not to trap any air under the film. An eye needs to be kept on it for a while as the film can slide on the varnish and become off centered. It will need to be left like this for a day or two until the varnish around the edge of the film hardens then any bubbles of air trapped inside can be pushed to one edge and the seal broken there to allow the air to escape. I would usually leave it to set for a week or so before fitting into the radio, it will take several weeks for the all the varnish to harden, but there is no visual difference between what has hardened and not. Any spills of varnish on the front or sides of the glass can be scraped away with a Stanley blade when hardened. It is quite a messy way in doing it but I feel it is worth it as the print is bonded onto the glass and that gives a slightly better image. I don't know how long this method lasts. The first one that I have done would be over a year ago and it is still OK. Frank |
11th Nov 2009, 8:11 am | #6 | |
Dekatron
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 5,761
|
Re: This may be a silly question, but......
Quote:
That tends to be the generic term for them in my experience. But I guess the answer is suck it and see! Best of luck. Regards David G4EBT |
|
11th Nov 2009, 10:40 am | #7 |
Rest in Peace
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 7,306
|
Re: This may be a silly question, but......
Thanks to Neil, Frank, and David for your advice. As always members of this forum are very helpful, as I hope I am to others from time to time. The U1015 doesn't have a dial lamp, Neil, so no probs there, so I may just laminate it between the dial glass and a sheet of clear plastic.
|
11th Nov 2009, 5:29 pm | #8 |
Dekatron
Join Date: May 2008
Location: Derby, UK.
Posts: 7,735
|
Re: This may be a silly question, but......
True for inkjet prints, but other way around for laser prints.
__________________
If I have seen further than others, it is because I was standing on a pile of failed experiments. |
11th Nov 2009, 7:08 pm | #9 |
Nonode
Join Date: Jun 2004
Location: Norwich, Norfolk, UK.
Posts: 2,543
|
Re: This may be a silly question, but......
Cheapo picture frame glass, from pound shops etc, is very thin and is idea for 'sandwiching'
David |
11th Nov 2009, 8:43 pm | #10 |
Heptode
Join Date: Feb 2006
Location: Roscommon, Ireland
Posts: 732
|
Re: This may be a silly question, but......
|
11th Nov 2009, 10:17 pm | #11 |
Rest in Peace
Join Date: Dec 2008
Location: Burton upon Trent, East Staffordshire, UK.
Posts: 1,686
|
Re: This may be a silly question, but......
Some serious circumspection is called for if you're using a laser printer due to the heat of the fuse roller. I've seen them virtually written off by using the wrong film.
Alan |
12th Nov 2009, 11:17 am | #12 |
Rest in Peace
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 7,306
|
Re: This may be a silly question, but......
I am using a HP Deskjet printer, so no problem with printing on acetate, but your advice, Alan, will no doubt help others.
|