|
General Vintage Technology Discussions For general discussions about vintage radio and other vintage electronics etc. |
|
Thread Tools |
12th Apr 2010, 8:29 pm | #1 |
Retired Dormant Member
Join Date: Jul 2007
Location: Christchurch New Zealand
Posts: 96
|
1952 - Build your own Transistor Radio
This interesting article predates the release of the worlds first transistor radio, the Regency TR-1, by two years!
http://www.jamesbutters.com/buildatransistorradio.htm |
12th Apr 2010, 9:05 pm | #2 |
Dekatron
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 5,763
|
Re: 1952 - Build your own Transistor Radio
Very interesting James - I wonder how many people took the gamble and forked out $6.50 each for three point contact transistors, and whether their gamble paid off!
I remember in my teens in the mid 1950s, surplus 'red spot' and 'white spot' transistors costing ten shillings - a tidy sum in those days, and more than most valves. Bascially, these were out of spec transistors offloaded onto the surplus market with no maker's ID marks. Red spot were audio - white spot (allegedly!) were good for RF. All very hit and miss - you either got lucky and they worked, or unlucky, and blamed yourself for killing these three legged fuses. Ah yes, I remember it well! David, G4EBT |
12th Apr 2010, 11:59 pm | #3 |
Retired Dormant Member
Join Date: Jul 2007
Location: Christchurch New Zealand
Posts: 96
|
Re: 1952 - Build your own Transistor Radio
And David, if their gamble paid off I wonder if any survive today?
|
13th Apr 2010, 10:07 am | #4 |
Dekatron
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 5,763
|
Re: 1952 - Build your own Transistor Radio
I'm sure they do - I have a few! I see them as testimony to my having a low gullibiblty threshold in parting with hard-earned cash as an impoverished apprentice in the late 1950s.
The extreme variabilty of 'red spot' surplus transistors meant that it was a gamble as to whther or not they worked at all - be it as oscillators, amplifiers, at AF or RF. I've unearthed a few out of my spares box and tested them. (We didn't have the means back then to test them accurately of course). The results are shown in the pics, and as can be seen, the gain ranges from as little as 5 to as much as 90, which shows the extent of variabilty. Those four will have cost me £2.00 altogether at the time (1958/9) - about a quarter of a week's wage as a senior apprentice. At least those transistors do still do work after more than fifty years! David, G4EBT |
13th Apr 2010, 12:25 pm | #5 |
Dekatron
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,535
|
Re: 1952 - Build your own Transistor Radio
The first device looks exactly like what was in a Repanco amplified crystal set my brother had in the early 60's. Never seen similar since (until now....)
I wonder if anyone recognises the package?
__________________
....__________ ....|____||__|__\_____ .=.| _---\__|__|_---_|. .........O..Chris....O |
14th Apr 2010, 7:40 am | #6 |
Retired Dormant Member
Join Date: Mar 2009
Location: Zala, Hungary
Posts: 418
|
Re: 1952 - Build your own Transistor Radio
That's a neat little transistor tester. I have one somewhere I made back in the mid '70s using a Colmans mustard tin as the case and a tape recorder vu meter for the gain readings!
|
14th Apr 2010, 8:50 am | #7 |
Heptode
Join Date: Feb 2006
Location: Roscommon, Ireland
Posts: 732
|
Re: 1952 - Build your own Transistor Radio
The battery voltage appears very high in that article at 45 Volts.
I haven't seen a transistor radio with a battery voltage that high before. Would it be a misprint and should read 4.5V? Frank |
14th Apr 2010, 12:30 pm | #8 |
Retired Dormant Member
Join Date: Apr 2003
Location: Blackpool, Lancashire, UK.
Posts: 4,061
|
Re: 1952 - Build your own Transistor Radio
I don't know, the Regency TR1 used a 22½V battery and that was a diddy little radio. This project is, by the standards we know today, very bulky so 45V possibly isn't as ludicrous as it may seem.
Also, the project is hardly what you'd call a portable or personal radio so the physical size of the battery wouldn't be a concern - up to a point anyway. I once had a little Emerson hybrid effort that could just about be called a 'coat pocket' radio and that used a 45V battery, so such batteries did exist. |
14th Apr 2010, 10:08 pm | #9 | |
Dekatron
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 5,763
|
Re: 1952 - Build your own Transistor Radio
Quote:
Bless! David. |
|