UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Other Vintage Household Electrical or Electromechanical Items

Notices

Other Vintage Household Electrical or Electromechanical Items For discussions about other vintage (over 25 years old) electrical and electromechanical household items. See the sticky thread for details.

Closed Thread
 
Thread Tools
Old 25th Sep 2021, 6:06 pm   #1
WillesdenBoy
Diode
 
Join Date: Sep 2021
Location: St Albans, Hertfordshire, UK.
Posts: 2
Default Braun H10 fan heater - how to open?

Hi everybody,

Just joined, first posting!

I have a Braun H10 fan heater (picture attached) which I purchased in the 1980s. It was designed by Ludwig Littman under the design direction of Dieter Rams in 1983 and was manufactured in Spain.

Although the unit's fan still works, the heating element has stopped working i.e the fan unit only blows cold air.

It's a gorgeous looking unit and I would like to have a go at repairing it (I'm from an electronics background).

The white part of the body is plastic and the black front section is metal. The only screws present on the body are 2 recessed screws underneath it.

I have removed these 2 screws but cannot figure out how to open the unit up. I've tried searching high and low on the internet but cannot find anything to help.

Is anybody familiar with this unit and how to open it?

Many thanks in advance.




bern
Attached Thumbnails
Click image for larger version

Name:	Braun H10 fan heater.JPG
Views:	163
Size:	33.0 KB
ID:	242140  

Last edited by WillesdenBoy; 25th Sep 2021 at 6:17 pm.
WillesdenBoy is offline  
Old 27th Sep 2021, 2:25 pm   #2
WillesdenBoy
Diode
 
Join Date: Sep 2021
Location: St Albans, Hertfordshire, UK.
Posts: 2
Default Re: Braun H10 fan heater - how to open?

Hi everybody,

Cracked it and unit is now open.

There are 2 additional recessed screws which are not normally visible.
These are located under the 2 rubber feet strips (which simply pull out).

Therefore, 4 screws in total, 2 visible and 2 hidden (as described).

Next step is to investigate the heater element not working.



bern
WillesdenBoy is offline  
Old 27th Sep 2021, 6:42 pm   #3
Nickthedentist
Dekatron
 
Nickthedentist's Avatar
 
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,820
Default Re: Braun H10 fan heater - how to open?

Well done and thanks for sharing.

Always worth looking under rubber feet, control knobs, labels etc.
Nickthedentist is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 7:11 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.