View Single Post
Old 12th Sep 2021, 10:27 pm   #1
Chris55000
Nonode
 
Join Date: Aug 2007
Location: Walsall Wood, Aldridge, Walsall, UK.
Posts: 2,868
Default Unknown Component Reference Numbers!

Hi!

Is there any way of determining, in the absence of obvious markings on the chassis/components themselves, what component reference numbers were used on chassis or wiring mounted parts?

I ask in connection with my forthcoming Cossor CDU130 manual project, where there is no parts list, drawings or any other maker's original information that might have offered clues? – I cannot locate a CDU130 book (even part of one) anywhere for any sum of money!

Obviously the three PCBs themselves have references that can be used, but there are still several rotary–wafer and slide switch assemblies on the front panel, chassis–mounted parts, diodes, resistors and capacitors, etc, connected to tagstrips.

Any suggestions?

(Some of the component types, but not all by any means, can be identified with the aid of the CD110 & manual, and copying part numbers over from the CDU110 book where the CDU130 has the same type of part, e.g., a front–panel slide switch)

Suggestions?

Chris Williams
__________________
It's an enigma, that's what it is! This thing's not fixed because it doesn't want to be fixed!

Last edited by Chris55000; 12th Sep 2021 at 10:32 pm.
Chris55000 is offline