Quote:
Originally Posted by snowman_al
Quote:
Originally Posted by hammom02
I'm getting a reading of about 130 for pin 3 and around 450 for pin 6. This is about the same for both valves. I don't know what pin 6 is supposed to be but that seems quite high.
|
@ StationX, fortunately they are resistance readings, not voltage readings. (I asked for a continuity test of the output transformer and used the valve pin numbers as I did not know how it is wired.)
|
Hence the importance of showing units. I did query whether it was volts.
A picture of how the new rectifier is connected could be useful, just in case.......