Re: Beovision 7102 CRT TV,schematic/advice please
thanks for all the advice guys
good and bad news on this one
another check with fresh eyes
made an error before. C7,did in fact have 330V across it,which is correct
fault was actually due to a dry joint,on link FE4
not sure how i missed it,as i had previously reflowed most of the power supply/line output module
anyway,power was then restored,and set ran ok,for about half an hour,then scan coils began to cook,literally.i could see some smoke.
think i'm going to call it a day on this one
|