View Single Post
Old 24th Feb 2021, 2:29 pm   #9
Oldcodger
Nonode
 
Join Date: Oct 2014
Location: West Midlands, UK.
Posts: 2,181
Default Re: Lettering Perspex?

Quote:
Originally Posted by Station X View Post
Good idea. I have both. I'll have to experiment, hopefully without wasting too much tape!

Thanks.
From the PCB side of things - Printable Acetate sheet . As sold by the likes of Hobby craft under thwe trade name "STIX2" , and other suppliers. ( I mentioned Hobbycraft as it;;'s
(https://www.hobbycraft.co.uk/advance...+acetate+sheet) .
I know some folks on here do not like using this S/W, but I've found it's possible to print on the reverse side and by using the options ,in colours other thn the program options ( copy & past in desired colours to a photo shop program) and adjust size .
i usually do the master onto white paper to check I've got the size right and then use a A 4/5/6 sheet to print on to . Might seem a bit of a faff, but I've found it works.
Hobbycraft do click & collect
Oldcodger is offline