UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Mr Hoover · 19th Feb 2007, 9:40 pm

Hi

There was an article in Television magazine many years ago about doing this
with a Decca CTV 25.

I recall it worked fairly well but the EHT regulation wasn't as good compared with the original PD500 shunt stabiliser arrangement.The original LOPT
never died,I recall selling the set around 1979 and subsequently doing the
same with another CTV 25

There may have been a later article In TV Mag regarding doing the same with the Philips G6 chassis.

Good Luck

19th Feb 2007, 9:40 pm	#2
Mr Hoover Hexode Join Date: Jan 2007 Location: Faro, Portugal Posts: 270	Re: Tripler to replace 25KV overwind Hi There was an article in Television magazine many years ago about doing this with a Decca CTV 25. I recall it worked fairly well but the EHT regulation wasn't as good compared with the original PD500 shunt stabiliser arrangement.The original LOPT never died,I recall selling the set around 1979 and subsequently doing the same with another CTV 25 There may have been a later article In TV Mag regarding doing the same with the Philips G6 chassis. Good Luck