View Single Post
Old 27th Jan 2021, 3:39 pm   #7
Join Date: Sep 2016
Location: Tring, Hertfordshire, UK.
Posts: 64
Default Re: Telequipment D67 Fault

The Y plate voltages can be varied between 35v and 65v using the vertical shift.
The one X plate that I could connect to showed a voltage that slowly increased from 17v to 50v and then quickly returned to 17v. This only happened once and then remained at 17v

While carrying out these tests, on one occasion the green spot was seen as I switched off.
MikeCross is offline   Reply With Quote