UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Ed_Dinning · 12th Feb 2007, 8:55 pm

Hi Gents, I try to avoid EHT overwinds as it is impossible to get the wire to allow wave winding. If it is possible to remove the overwind intact, or fit one from another set, it should be an easy job to re-wind the various other windings. Use modern double insulated wire and polyester transformer tape.
Impreg in candle wax afterwards.

Ed

12th Feb 2007, 8:55 pm	#3
Ed_Dinning Dekatron Join Date: Jan 2004 Location: Newcastle upon Tyne, Tyne & Wear, UK. Posts: 8,194	Re: LOPT rewinding Hi Gents, I try to avoid EHT overwinds as it is impossible to get the wire to allow wave winding. If it is possible to remove the overwind intact, or fit one from another set, it should be an easy job to re-wind the various other windings. Use modern double insulated wire and polyester transformer tape. Impreg in candle wax afterwards. Ed