UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

SiriusHardware · 5th May 2021, 9:47 pm

I'm guessing that if you can take a shot of the underside of the PCB, we'd probably like that one in the same super hi-res as the top view.

As Owen said, if you can positively identify the +5V and 0V supply rails you can probably power it up to the extent that it will produce a UHF RF signal which can be tuned in on an analogue TV. That's assuming that you don't have the actual power supply for it of course.

5th May 2021, 9:47 pm	#34
SiriusHardware Dekatron Join Date: Aug 2011 Location: Newcastle, Tyne and Wear, UK. Posts: 11,556	Re: Early EPROM programmer. I'm guessing that if you can take a shot of the underside of the PCB, we'd probably like that one in the same super hi-res as the top view. As Owen said, if you can positively identify the +5V and 0V supply rails you can probably power it up to the extent that it will produce a UHF RF signal which can be tuned in on an analogue TV. That's assuming that you don't have the actual power supply for it of course.