Re: INS8073 - What I wanted, but never got.
From this afternoon, the INS8073 is alive!
I will post the final schematic.
I could not get the clock pulsing from the schematic that was drawn in my first post. After modification with the same clock I used for the INS8060, all worked fine. This means I only need one inverter from the 74LS14 (TTY after F1)
Mark you were right about the D1, D2, I had to pull them to ground to get 4800 baud at start up.
Tiny basic is a bit different from NIBBLE so I have to find my way programming it but all seem to work as described in the manual.
I enclose some pictures so you can see the result of my weekend's work.
Last edited by audiokit; 2nd May 2021 at 6:06 pm.
|