UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - INS8073

audiokit · 1st May 2021, 2:34 pm

All Components are mounted, the wire wrapping can start. I populated the sockets just to show how it will look and of course I will take the IC's out when wiring the back. This is the schematic that I showed in my first post (Radio Bulletin). Perhaps I don't need the 4Mhz Crystal but in the middle I reserved a socket to push it in, should I need (or want) it.

1st May 2021, 2:34 pm	#41
audiokit Triode Join Date: Jan 2021 Location: Hulst, Netherlands. Posts: 47	Re: INS8073 - What I wanted, but never got. All Components are mounted, the wire wrapping can start. I populated the sockets just to show how it will look and of course I will take the IC's out when wiring the back. This is the schematic that I showed in my first post (Radio Bulletin). Perhaps I don't need the 4Mhz Crystal but in the middle I reserved a socket to push it in, should I need (or want) it. Attached Thumbnails Last edited by audiokit; 1st May 2021 at 2:47 pm.