UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Non-working Commodore PET 3016

ScottishColin · 11th Jan 2021, 6:33 pm

PET powered off an unplugged.

I am getting the following:

UG5 Pin 7 Black Pin 8 Red - 1.35 m Ohm
UG5 Pin 7 Red Pin 8 Black - flickering between 0 - 20 - 60 m Ohms

I'm starting to doubt myself now, but I know I'm doing the readings right....

Are we at the stage where if you have the time, you may be able to take a look at the motherboard? or is there something else yet?

I'm happy to pay of course.

11th Jan 2021, 6:33 pm	#86
ScottishColin Octode Join Date: May 2012 Location: Perth, Scotland Posts: 1,817	Re: Non-working Commodore PET 3016 PET powered off an unplugged. I am getting the following: UG5 Pin 7 Black Pin 8 Red - 1.35 m Ohm UG5 Pin 7 Red Pin 8 Black - flickering between 0 - 20 - 60 m Ohms I'm starting to doubt myself now, but I know I'm doing the readings right.... Are we at the stage where if you have the time, you may be able to take a look at the motherboard? or is there something else yet? I'm happy to pay of course.