View Single Post
Old 12th Jul 2017, 4:42 pm   #15
stuboy57
Retired Dormant Member
 
Join Date: Feb 2017
Location: Peterborough, Cambridgeshire, UK.
Posts: 86
Default Re: Cossor Melody Maker 494 A.C. Valve radio

Quote:
Originally Posted by Andrewausfa View Post
Ideal set to start with I'd say.

Capacitors wise, you'll want and you may as well get 10 of each but in brackets what you actually need: 100nF (3). 4.7nF (3) 22nF (1) all at 630v. One of the 4.7nF is on the output transformer check that as it may be a 1000v component. You want axial polyester film or just search for MKT1813.
Quick question are the 47nf capacitors used in place of the 0.005mfd capacitors? that's capacitors C1,C16,C20 on the trader service sheet as I cannot find any 0.005 mfd capacitors
Also need to wire or plug the speaker in as is was not attached,does one go to the chassis and the other in the EXT LS on back of set?
Carefully finding my way, thanks for the help so far
stuboy57 is offline