Re: SMITHS "servomotor" 1111SCM-2
Hi Ron,
That paragraph really does sound exactly like these motors, so according to the book it's a case of using the windings in series applying 120V across the pair and treat it like a single coil. I won't necessarily need the centre tap, but its an option depending on the control circuit I develop for it.
Many thanks for that info!! Much appreciated!
If you wouldn't mind scanning that chapter, I'd be most grateful for the help!! when i eventually write this project up on my website, I'll include a thank-you note! I've looked on ebay and amazon and can't find a copy of the book...
Cheers, Scott.
Last edited by ScottBouch; 14th Feb 2020 at 11:43 am.
|