Re: Replacement meter for Avo 160
Hi
I just corrected my MK3 meter, it showed 15% too low, after adding two (see the picture) neodymium magnets 10X3 mm (I bought different thickness, but 2*3 mm was perfect strength) above the screw on each side, it was spot on 30µA.
I removed one screw at a time, grabbed the magnet with a good grip plier and placed it above the screw hole, and then pushed it with an non magnetic screwdriver to the position I wanted. All worked fine
Br Svante
Last edited by Cobaltblue; 18th Oct 2021 at 5:29 pm.
Reason: Changed milli to micro
|